Manuals / Lucent Technologies / Home Audio / Speaker

Lucent Technologies 585-210-940 manual Troubleshooting, Error Messages Continued, Message Response

Models: 585-210-940

1 106

Page 100

Troubleshooting	CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Error messages	94

Error Messages (Continued)

Message:

Explanation:

Response:

The disk is not recognized by cms.

The disk is either not a standard Sun disk drive, or is larger than 4.2 gigabytes.

Replace the disk with a standard Sun disk drive of not more than 4.2 gigabytes capacity.

Message:

Response:

The DiskSuite Software must be installed

to run this script.

Install Solstice DiskSuite software before attempting to run this script.

Message:

Explanation:

Response:

The file filename could not be restored.

The previous action failed, and the md.tab or vfstab file could not be copied back. The existing files may not accurately reflect the system environment.

Check the file and repair it if necessary. See “How to Set Up State Database Replicas” in Chapter 3.

Message:

Explanation:

Response:

The /cms filesystem needs to be mounted

/cms must be mounted for the command to work.

Mount /cms with the command: mount /cms

Page 100

Image 100

Lucent Technologies 585-210-940 Troubleshooting, Error Messages Continued, Message Explanation Response, Message Response

Contents

CentreVu Call Management System 585-210-940Comcode 108502352 Issue 1 DecemberRelease 3 Version Disk-MirroredSystems Copyright  1999 Lucent Technologies Table of Contents Page Index Page Disk mirroring defined Introduction to Disk Mirroring1Metadevices metadevices ConcatenatedIntroduction to Disk Mirroring Mirrors State databasesIntroduction to Disk Mirroring Solstice DiskSuiteIntroduction to Disk Mirroring How CMS implements disk mirroringd21 d20 Introduction to Disk Mirroring d13 d12d17 d16 swapEnterprise Mirror layoutscomputer computer EnterpriseIntroduction to Disk Mirroring Required software Additional referencesIntroduction to Disk Mirroring How CMS implements disk mirroringInstalling Mirrored Systems Disk drive slotsStep 1 Identify mirror devices Increasing system capacityInstalling Mirrored Systems Installing Mirrored Systems system Step 2 Install the mirror disks on anEnterprise Installing Mirrored Systems Step 4 Partition the mirror disks Installing Mirrored SystemsInstalling Mirrored Systems Step 6 Create the md.tab table entries Step 5 Create the state database replicasInstalling Mirrored Systems d x y 1 device Installing Mirrored SystemsInstalling Mirrored Systems hostname login root Password password ##metaroot d13 # /usr/sbin/shutdown -i6 -g0 -yStep 8 Set up the mirrors for the swap space Installing Mirrored SystemsInstalling Mirrored Systems Step 9 Set up the /cms mirror Installing Mirrored SystemsInstalling Mirrored Systems Step 10 Verify disk spaceDisk Space Verification Step 11 Create an alternate boot device Installing Mirrored SystemsInstalling Mirrored Systems Step 1 Install the hardware Step 2 Install the operating systemEnterprise EnterpriseStep 3 Install the application software Step 4 Check the disk.type file Installing Mirrored SystemsInstalling Mirrored Systems Step 6 Run the setup scripts Installing Mirrored SystemsStep 7 Verify disk space Installing Mirrored SystemsInstalling Mirrored Systems Disk Space VerificationStep 9 Create an alternate boot device Step 8 Install the CMS softwareInstalling Mirrored Systems Installing Mirrored Systems Installing Mirrored Systems Using the alternate boot device Maintaining Mirrored SystemsCanceling chkDisks Maintaining the chkDisks crontabActivating chkDisks Verifying chkDisks Changing the scheduled run timeDoing a CMSADM backup on a mirrored system Step 2 Run the backupStep 1 Print the vfstab file hostname login rootStep 3 Label and store the tapes Maintaining Mirrored SystemsRestoring from a CMSADM Backup Maintaining Mirrored SystemsRestoring from a CMSADM Backup Maintaining Mirrored SystemsRepairing or rebuilding the /cms file system Repairing /cmsRebuilding /cms Maintaining Mirrored Systems Maintaining Mirrored Systems Step 1 Power off the system Restoring a mirrored system from a CMSADM backupStep 2 Install the new drives Step 3 Boot the system from the compact disk Maintaining Mirrored SystemsTask ActionStep 4 Identify the system Maintaining Mirrored SystemsTask ActionStep 5 Set the Name Service options Maintaining Mirrored SystemsTask ActionStep 6 Set the date and time Maintaining Mirrored SystemsTask ActionMaintaining Mirrored Systems TaskAction ResultStep 9 Set up the disk partitions Step 8 Select the hard disksSlice numbers Names inSizes in this columnStep 10 Install the operating system Maintaining Mirrored SystemsTask ActionStep 11 Complete the OS installation Maintaining Mirrored SystemsTask ActionStep 14: Reestablish the disk mirrors Step 13 Restore the backuphostname login root 8.Set up the root mirror 9. Get to the boot promptMaintaining Mirrored Systems 5.Create md.tab.newhostname login root Password root password Maintaining Mirrored SystemsRestoring specific files from a CMSADM backup Maintaining Mirrored SystemsAdding new disks to a standard mirrored system hostname login root Maintaining Mirrored SystemsMaintaining Mirrored Systems Adding new disks to a nonstandard mirrored system Maintaining Mirrored SystemsMaintaining Mirrored Systems Maintaining Mirrored Systems Replacing a faulty disk Step 1 Identify the faulty diskStep 2 Identify the submirrors Maintaining Mirrored SystemsStep 3 Detach the submirrors metadetach metamirror submirrorStep 5 Replace the faulty disk drive Maintaining Mirrored SystemsStep 6: Recreate the state database replicas Maintaining Mirrored SystemsStep 8 Reboot the system boot disks only Step 7 Reattach the submirrorsSetting up replicas Replacing replicas State Database ReplicasPartitioning disks with the format command Maintaining Mirrored Systems Maintaining Mirrored Systems b.Edit the /etc/opt/SUNWmd/md.tab fileRoot Metadevice Device Names MetadeviceExamples of valid system files Valid vfstab filesValid md.tab files Excessively long resync Troubleshooting4Solstice DiskSuite problems The system fails to recognize all disk drives Troubleshootingprobe-scsi-all probe-fcal-allok setenv auto-boot?true ok boot -rconsole login root Password Unit 0 Disk SEAGATE ST34371W SUN4.2G74629737K6748Fixing “needs maintenance” messages TroubleshootingPrimary boot device is not available Boot problemsTrying to boot from the wrong device Excessive reboot time TroubleshootingLog files TroubleshootingFile Name DescriptionError messages TroubleshootingError Messages Message Explanation ResponseTroubleshooting Error Messages ContinuedMessage Explanation Response Message Explanation ResponseTroubleshooting Troubleshooting filename restored from filebackup TroubleshootingTroubleshooting Error Messages ContinuedMessage Response Message ResponseTroubleshooting Error Messages ContinuedMessage Explanation Response Message ResponseTroubleshooting Error Messages ContinuedMessage Response Message Explanation ResponseTroubleshooting Symbols Indexpartitioning tape drivesupgrading and increasing system capacityHow Are We Doing?