Lucent Technologies 585-210-940 manual Troubleshooting, Error Messages Continued, Message Response

Troubleshooting	CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Error messages	95

Error Messages (Continued)

Message:

Response:

This command may hang the system if a Stop- A or halt command has been executed. Please type reset-all to reset the system before executing this command. Do you wish to continue?

1.Enter: N (to prevent the probe from continuing).

2.Enter: setenv auto-boot? false

(to keep the system from rebooting)

3.Enter: reset-all

The reset may take a minute to complete. Once it does, you may do the probe-scsior probe-scsi-alland perform any other boot prom level diagnostics.

4.IMPORTANT: Before you reboot again, enter: setenv auto-boot? true

Failure to do so will cause the reboot to stop at the boot prompt.

Message:

Explanation:

Response:

touch: /cms/db/unix_start cannot create

A CMSADM backup was done when CMS was still running. An attempt is made to restart cms, but cms files are not yet available.

No response required. The message will disappear after you have restored and migrated CMS.

Message:

Explanation:

Response:

trying to add two new disks, but a mirrored setup needs to be in place.

You have tried to do an olds -mirrored-setupon an unmirrored system.

If you want a mirrored system, set it up as one. See the appropriate section in Chapter 2 for instructions on how to set up a mirrored system.

Message:

Explanation:

Response:

Unbalanced configurations not supported.

You tried to set up a system with an odd number of disk drives, or you tried to add disks without having rebooted via a “boot -r” command.

If necessary, add another disk drive to make the drive count even. Then reboot the system with “boot -r”.