Lucent Technologies 585-210-940 manual Troubleshooting

Troubleshooting	CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Error messages	90

Error Messages (Continued)

Message:

Explanation:

Response:

/etc/system has been updated since the

last reboot. CMS cannot run without an up-

to-date /etc/system file.

/etc/system can change when a particular Solaris patch is applied to the system or when state database replicas are removed and re-added during a boot disk replacement.

Reboot the system.

Message:

Explanation:

Response:

Failed activating new replicas, replicas

already active, or a second disk does not

exist

The system does not have all the replicas it needs to be functional (it needs at least three), or the replicas you attempted to create already exist.

Use metadb -ito verify that at least three replicas are active. If not, add replicas (see Chapter 3).

Message:

Explanation:

Response:

Failed: disk cxtyd0 or cx’ty’d0 already

setup, exiting ...

You are trying to set up a disk that is already a part of the configuration. You probably mistyped the name.

Set up the disk with the appropriate device name.

Message:

Response:

Illegal Request, cannot setup

Check your hardware configuration and your usage of the olds command.

Message:

Response:

in order to attach disk, /cms must already

be mounted, exiting...

Mount cms with this command: mount /cms

Message:

Explanation:

Response:

ksh: command: not found

Command does not exist or is not in the execution path.

Use the entire path—as pathname/command—or add it to the execution path with the following command:

#export PATH=$PATH:pathname

The path of the metastat, metadb, metattach, and metadetach commands is /usr/opt/SUNWmd/sbin; the path of the olds command is /olds