Ricoh SP C250SF All the print cartridges again, Horizontal lines appear on, While it is printing

Printer Problems

	Problem		Solution
White lines appear.		The intermediate transfer belt is dirty.
		Follow the procedure below to clean the belt:
		1.	Open the top cover while the power is on.
		2.	Remove all print cartridges from the printer.
		3.	Close the top cover with both hands carefully.
		4.	When cleaning finishes, open the top cover and attach
			all the print cartridges again.
	DAC607
		If this procedure does not resolve the problem, contact your
		sales or service representative.
Horizontal lines appear on the		•	Impact can cause lines to appear on printed paper and
printed paper.			other malfunctions.
			Protect the printer from impact at all times, especially
			while it is printing.
		•	If lines appear on prints, turn the printer off, wait a few
			moments, and then turn it back on again. Then, perform
			the print job again.
The print color is different from the		If a specific color is missing, turn the power switch off and on.
color specified.		If this does not resolve the problem, contact your sales or
		service representative.
Photo images are coarse.		Some applications lower the resolution for making prints.
A color is missing or a printed image		•	The paper being used may be damp. Use paper that has
is partially blurred.			been stored properly.
			See page 71 "Loading Paper".
		•	Toner is almost empty. If the following message appears
			on the control panel, replace the print cartridge:
			"Replace Toner: X". ("X" indicates the toner color)
			See page 273 "Replacing the Print Cartridge".
		•	Condensation may have occurred. If rapid change in
			temperature or humidity occurs, use this printer only after
			it has acclimatized.
Color shift occurs.		Perform the [Color Registration] under [System Settings].
		For details, see page 209 "System Settings".

317