Ricoh SP C250SF, SP C252SF operating instructions Scanner Mode Screen, Sing/Mul Scn Size

5. Scanning Originals

Scanner Mode Screen

This section provides information about the screen in scanner mode.

By default, the display shows the copier screen when the machine is turned on. If the copier or fax screen is shown on the display, press the [Scanner] key on the control panel to switch to the scanner screen.

DAC507

Screen in standby mode

1 Ready

2	Specify Dest.
	300 x 300dpi
		8 1/2 x 11
3	Sing/Mul	Scn Size

DAC526

1.Current status or messages Displays the current status or messages.

2.Current settings

Displays the current scanning mode and scan settings.

•When "Specify Dest." is displayed:

Scan to E-mail, Scan to FTP, or Scan to Folder functions can be used.

•When "Save Scn Data to USB" is displayed:

A USB flash disk is inserted in the machine, and the Scan to USB function can be used.

3.Selection key items

Displays the functions you can use by pressing the corresponding selection keys.

•The machine's default mode at power on can be specified in the [Function Priority] setting under [Admin. Tools]. For [Function Priority], see page 228 "Administrator Settings".

121