Ricoh SP C252SF, SP C250SF operating instructions Manually Performing 2-Sided Copying Using the ADF

4. Copying Originals

2Sd 2Orig->Comb 2on1 2Sd

Copies both sides of one 2-sided original to one side of a sheet, and both sides of another 2-sided original to the other side of the sheet.

2Sd 4Orig->Comb 4on1 2Sd

Copies four 2-sided originals to one sheet with four pages per side.

Manual 2 Sided Scan Mode

Select this mode to make 2-sided copies using the exposure glass.

Manually Performing 2-Sided Copying Using the ADF

•Make sure the same number of pages will be printed on the front and back of all sheets. Otherwise, the job will be reset.

1.Press [Dup/Comb].

2.Press the [] or [] key to select the desired copy mode, and then press the [OK] key.

3.Press the [] or [] key to select paper orientation and page order, and then press the [OK] key.

4.Place all 2-sided originals into the ADF with their fronts facing up.

5.Press the [B&W Start] key or [Color Start] key.

6.After all originals are delivered, place them into the ADF again with their fronts facing down.

7.Press the [B&W Start] key or [Color Start] key again. Use the same mode (color or black-and-white) for both sides. After all pages have been scanned, copying starts.

•After you place the originals, press the [B&W Start] key or [Color Start] key within the time specified in [System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 228 "Administrator Settings".

•If the memory becomes full while originals are being scanned, the job is canceled.

Manually Performing 2-Sided Copying Using the Exposure Glass

•If you print odd-number pages while using [Manual 2 Sided Scan Mode], you cannot print the last page. In this case, print the last page with [Dup/Comb] set to [Off].

114