Ricoh SP C250SF Scanner Problems, When You Cannot Browse the Network to Send a Scan File

Scanner Problems

Scanner Problems

When You Cannot Browse the Network to Send a Scan File

	Problem	Solution
The following machine settings may		Check the settings. See page 42 "Configuring Network
not be correct:		Settings".
•	IP address
•	Subnet Mask

When Scanning Is Not Done As Expected

Problem	Solution
The machine does not start scanning.	The ADF or its cover is open. Close the ADF or its cover.
The scanned image is dirty.	• The exposure glass or ADF is dirty. See page 273
	"Maintaining the Machine".
	• Before placing originals on the exposure glass, make
	sure that toner or correction fluid is dry.
The scanned image is distorted or	The original was moved during scanning. Do not move the
out of position.	original during scanning.
The scanned image is upside down.	The original was placed upside down. Place the original in the
	correct orientation. See page 82 "Placing Originals".
The scanned image is blank.	The original was placed with the front and back reversed.
	When using the exposure glass, place originals copy side
	down. When using the ADF, place originals copy side up. See
	page 82 "Placing Originals".
The scanned image is too dark or	Adjust the image density. See page 136 "Specifying the Scan
too light.	Settings".
The Scan to E-mail, Scan to FTP, or	Check if a USB flash disk is inserted into the machine. If a USB
Scan to Folder function does not	flash disk is inserted, scanning functions other than Scan to
work.	USB are not available from the control panel.

323