Ricoh SP C250SF Configuring the IPsec Settings, IPsec Global Settings Tab, IPsec Policy List Tab

Configuring the IPsec Settings

Configuring the IPsec Settings

Click [IPsec Settings] to display the page for configuring the IPsec settings.

This page contains the following tabs: [IPsec Global Settings] and [IPsec Policy List].

• This function is available only when an administrator password is specified.

IPsec Global Settings Tab

Item	Description
IPsec Function	Select whether to enable or disable IPsec.
Default Policy	Select whether to allow for the default IPsec policy.
Broadcast and	Select the services that you do not want to apply IPsec from the following:
Multicast Bypass	[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
All ICMP Bypass	Select whether to apply IPsec to ICMP packets (IPv4 and IPv6) from the
	following:
	[Active]: All ICMP packets will be bypassed without IPsec protection.
	"ping" command (echo request and echo reply) is not encapsulated by
	IPsec.
	[Inactive]: Some ICMP message types will be bypassed without IPsec
	protection.

IPsec Policy List Tab

Item	Description
No.	IPsec policy number.
Name	Displays the name of the IPsec policy.
Address Settings	Displays the IP address filter of the IPsec policy as below:
	Remote address/Prefix length
Action	Displays the action of the IPsec policy as "Allow", "Drop", or "Require
	Security".

263