Ricoh SP C252SF, SP C250SF operating instructions Jbig

7.Configuring the Machine Using the Control Panel

•9.6 Kbps

•7.2 Kbps

•4.8 Kbps

•2.4 Kbps

•Reception Speed

Specifies the reception speed for the fax modem. Default: [33.6 Kbps]

•33.6 Kbps

•14.4 Kbps

•9.6 Kbps

•7.2 Kbps

•4.8 Kbps

•2.4 Kbps

•JBIG

Enables transmission and reception of JBIG-compressed images.

Note that to use this function, [ECM Transmission] and [ECM Reception] must also be enabled.

This function is not available with Internet Fax. Default: [Active]

•Active

•Inactive

Report Print Settings

•Print TX Status Report

Sets the machine to print a transmission report automatically after a fax transmission.

When the machine is in Immediate Transmission mode, the image of the original will not be reproduced on the report, even if [Error Only (Image Attached)] or [Every TX (Image Attached)] is selected.

Note that if a memory error occurs for LAN-Fax transmission, a transmission report will always be printed regardless of this setting.

The transmission report will be printed on A4 or Letter size paper. Default: [Every TX (Image Attached)]

The default depends on the [Country] setting.

•Error Only

Prints a report when a transmission error occurs.

206