Ricoh SP C252SF Message Causes Solutions RX Comm. Error, Reconnect the Ethernet cable properly

10. Troubleshooting

Message	Causes	Solutions
RX Comm. Error	A reception error occurred, and	If possible, contact the sender of the fax
	the fax could not be received	and ask them to resend it.
	correctly.
Scan (NW)	A scanned file could not be sent	Reconnect the Ethernet cable properly,
Disconnected	because the Ethernet cable was	and then try the operation again.
	not connected properly.
Scan (USB)	The USB cable was	Reconnect the USB cable properly, and
Disconnected	disconnected while scanning	then try the operation again.
	from a computer.
Server Connection	A scanned file could not be sent	Check if the destination is registered
Failed	because the destination could	correctly, and then try the operation again.
	not be reached.
Server Response	An error occurred in	Check if the destination is registered
Error	communication with the server	correctly, and then try the operation again.
	before beginning transmission.	If the problem persists, contact the network
		administrator.
Service call - SCXXX	A fatal hardware error has	Contact your sales or service
	occurred, and the machine	representative.
	cannot function.
Set Correct Paper	The tray selected in [Select	While the message is displayed, press the
	Paper Tray] under [Fax	[OK] key. A menu for changing the paper
	Features] does not contain A4,	size specified for the current tray appears.
	Letter, or Legal size paper.	Load A4/Letter/ Legal size paper in the
		tray, and then select the corresponding
		paper size using [ ] or [ ] key and press
		the [OK] key. The machine will print out the
		fax.
		Note that the paper size setting for the tray
		under tray paper settings will be changed.
		See page 215 "Tray Paper Settings".

340