Ricoh SP C250SF, SP C252SF operating instructions System Settings

System Settings

Select this mode if printouts are still curled and/or blurred even when prints are made in [Lvl.

2:Medium]. Note that this mode requires more time to produce the first print than [Lvl.2: Medium].

Color Registration

Adjusts color registration as necessary. (This adjustment is usually executed by the machine automatically.)

Press [Yes] to execute color registration adjustment. Press [No] to exit to the previous level of the menu tree without adjusting color registration.

Auto Cleaning

Sets the machine to execute periodic cleaning of the interior. You may hear some noise while cleaning is being executed. This noise does not indicate a malfunction.

Default: [On]

•On

•Off

B&W Print Priority

Sets the machine to suppress the consumption of color toner when printing black-and-white pages. Also, the amount of color toner consumed during warm-up time for maintenance will also be lowered. Note that the default value for this setting will not be restored by performing [Reset All Settings] under [Admin. Tools] or [Reset Menu Settings] under [Administrator Tools] of Web Image Monitor.

Default: [Off]

•On

•Off

Notify: Toner Almost Empty

Specifies the low toner level notification timing.

Note that the default value for this setting will not be restored by performing [Reset All Settings] under [Admin. Tools] or [Reset Menu Settings] under [Administrator Tools] of Web Image Monitor.

Default: [Normal]

•Sooner

Low toner level notification will be made when the number of pages that can be printed with the remaining toner is approximately 300.

•Normal

Low toner level notification will be made when the number of pages that can be printed with the remaining toner is approximately 200.

•Later

213