Ricoh SP C250SF, SP C252SF operating instructions Adjusting Image Density

Specifying the Scan Settings

•You can change the machine's default [Scan Size] setting to always scan originals with a specific scanning size. For details, see page 198 "Scanner Features Settings".

•Temporary job settings are cleared in the following cases:

•When no input is received for the period of time specified in [System Auto Reset Timer] while the initial screen is displayed. For details, see page 228 "Administrator Settings".

•When the [Clear/Stop] key is pressed while the initial screen is displayed.

•When the machine's mode is changed.

•When the power is turned off.

•When the machine's default for the same setting is changed

Adjusting Image Density

This section explains how to adjust image density for the current job.

There are five image density levels. The higher the density level, the darker the scanned image.

1.Press the [Density] key.

DAC511

2.Press the [] or [] key to select the desired density level, and then press the [OK] key.

•You can change the machine's default [Density] setting to always scan with a specific density level. For details, see page 198 "Scanner Features Settings".

•Temporary job settings are cleared in the following cases:

•When no input is received for the period of time specified in [System Auto Reset Timer] while the initial screen is displayed. For details, see page 228 "Administrator Settings".

•When the [Clear/Stop] key is pressed while the initial screen is displayed.

•When the machine's mode is changed.

•When the power is turned off.

137