Ricoh SP C250SF When PictBridge Printing Does Not Work, Disconnect the USB cable from the machine

Direct Printing from a Digital Camera (PictBridge)

2.Disconnect the USB cable from the machine.

Make sure to close the cover of the USB flash disk port after use.

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can occur during PictBridge printing.

Problem	Cause		Solution
PictBridge is not available.	There is a problem with the USB	Use the following procedure to
	connection or the PictBridge	check the connection and
	settings.	settings:
		1.	Disconnect and then
			reconnect the USB cable.
		2.	Check the PictBridge
			settings are enabled.
		3. Disconnect the USB cable,
			and then turn off the
			machine. Turn the machine
			back on. When the
			machine has fully booted
			up, reconnect the USB
			cable.
When two or more digital	You have connected multiple	Connect one digital camera
cameras are connected, the	digital cameras.	only.
second and subsequent		Do not connect multiple
cameras are not recognized.
		cameras.
Cannot print.	The specified number of prints	The maximum specifiable print
	exceeds the maximum number	quantity at a time is 999.
	that can be printed at a time.	Change the quantity to 999 or
		less, and then retry printing.

97