Ricoh SP C252SF, SP C250SF Configuring Network Settings, Configuring the IP Address Settings

1. Getting Started

Configuring Network Settings

This section describes configuring the settings required to use the machine on a network.

Configuring the IP Address Settings

The procedure for configuring network settings differs depending on whether the IP address is assigned automatically by the network (DHCP), is specified manually.

•The password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].

•If your network environment requires a specific transmission speed that is not automatically detected, specify the transmission speed in [Set Ethernet Speed] under [Network Settings].

•First configure the IP address setting, then install the driver. For details about installing the driver, see the Driver Installation Guide.

•For details about printing the configuration page, see page 218 "Printing Lists/Reports".

Specifying settings to receive an IPv4 address automatically

•A DHCP server is required on the network for the machine to receive an IPv4 address automatically.

1.Turn on the machine.

2.Press the [User Tools] key.

DAC509

3.Press the [] or [] key to select [Network Settings], and then press the [OK] key.

4.If you are requested to enter a password, enter the password using the number keys, and then press the [OK] key.

5.Press the [] or [] key to select [IPv4 Configuration], and then press the [OK] key.

42