Ricoh SP C252SF, SP C250SF operating instructions Usb, Default 60 sec 15 sec 300 sec Network

7.Configuring the Machine Using the Control Panel

•Middle

•High

•Alarm Volume

Specifies the volume of the alarm that sounds when an operation error occurs.

•Off

•Low

•Middle

•High

I/O Timeout

•USB

Specifies how many seconds the machine waits for print data, if the data is interrupted while it is being sent from the computer via USB. If the machine does not receive any more data within the time specified here, the machine only prints the data it has received. If printing is frequently interrupted by data from other ports, increase the timeout period.

Default: [60 sec.]

•15 sec.

•60 sec.

•300 sec.

•Network

Specifies how many seconds the machine waits for print data, if the data is interrupted while it is being sent from the computer via network. If the machine does not receive any more data within the time specified here, the machine only prints the data it has received. If printing is frequently interrupted by data from other ports, increase the timeout period.

Default: [60 sec.]

•15 sec.

•60 sec.

•300 sec.

•Locked Print

Specifies how many seconds the machine holds a new Locked Print file, when the machine cannot store any more Locked Print files. Within this time, you can print or delete the new Locked Print file. You can also print or delete an existing Locked Print file so that the new Locked Print file can be stored in the machine.

This setting appears only for the Type 2 model. Default: [60 seconds]

•0 to 300 seconds, in increments of 1 second

210