Ricoh SP C252SF, SP C250SF operating instructions Checking the printer driver settings

10. Troubleshooting

Checking the printer driver settings

Problem	Solution
The printed image is smudged.	PCL 5c/6
	On the printer driver's [Paper] tab, select [Bypass Tray] in
	the "Input Tray:" list. In the "Paper Type:" list, select a
	proper paper type.
	PostScript 3
	On the printer driver's [Paper/Quality] tab, select
	[Bypass Tray] in the "Paper Source" list. In the "Media"
	list, select a proper paper type.
Images smudge when rubbed.	PCL 5c/6
(Toner is not fixed.)	On the printer driver's [Paper] tab, select a proper paper
	type in the "Paper Type:" list.
	PostScript 3
	On the printer driver's [Paper/Quality] tab, select a
	proper paper type in the "Media" list.
The printed image is different from	Only when using PCL 5c/6
the image on the computer's display.	On the printer driver's [Print Quality] tab, select [Raster]
	in the "Graphics Mode" list.
When printing graphics, the output	To print accurately, specify the printer driver setting to print
and the screen are different.	without using the graphics command. For details about
	specifying the printer driver setting, see the printer driver Help.
Images are cut off, or excess is	Use the same size paper selected in the application. If you
printed.	cannot load paper of the correct size, use the reduction
	function to reduce the image, and then print. For details about
	the reduction function, see the printer driver Help.
Photo images are coarse.	Use the application's or printer driver's settings to specify a
	higher resolution.
	For details about the printer driver's settings, see the printer
	driver Help.
A solid line is printed as a dashed	Change the dithering settings on the printer driver. For details
line or appears blurred.	about the dithering settings, see the printer driver Help.

310