Windows NT 4.0 Installation

Note: Make sure that you are installing the correct LavaPort-Quad

drivers for the appropriate operating system.

DO NOT install drivers for other Windows versions

under Windows NT

Windows NT Driver Installation

1.Once the LavaPort-Quad is installed in your PC, turn on your computer and start NT.

2.Place the LavaPort-Quad installation diskette into your floppy drive and select Run from the Start Menu. When prompted type: A:\NT4.0\Setup.

3.After the necessary files have been copied, select My Computer and start Control Panel. A new icon will appear called“LavaPort”.This applet should now be used to configure ALL Com Ports in your PC - not just LavaPorts.