Lava Computer LavaPort-Quad, MOKO L75.2 Windows Installation, Windows Driver Installation

Windows Installation

Windows Driver Installation

Note: Make sure that you are installing the correct LavaPort-Quad

drivers for the appropriate operating system.

DO NOT install NT or Windows 3.x drivers under other

versions of Windows

1.With the power turned off, insert the LavaPort-Quad card into any free PCI slot in your PC. Make sure the card is well seated. Insert the bracket with Ports 3 and 4 into a free slot. If you must detach the cables from the card to do so, be sure to re-install the cables back onto the card with the red wire corresponding to the“1”on the board. Turn your PC on and start Windows.

2.Windows will automatically detect the LavaPort-Quad as a new PCI Serial Controller and ask you to insert the Lava Installation Diskette. The installation files are located in either the root or the Win95 subdirectory of this disk. On some PC’s you may have to manually type A:\WIN95 when prompted for the Lava Installation Diskette.

3.After the necessary files have been copied,Windows will complete

the full installation of the LavaPort-Quad. During this process, two LavaPort-Quad Parents will be created in Device Manager under Multi-Function Adapters, and four child ports will be created under Control Panel System Device Manager Ports.

6