Product Application

•Local CLI management console port on a Mini Jack connector

•Remote management capability through iMediaChassis series

•AIS generation on signal loss on all E1 interfaces

•SNMP Alarm TRAP reporting in managed chassis

•MDI/MDIX automatic Ethernet port switching

The IE-iMcV-E1-Mux/4 module is a dual-wide iMcV module.

Compatible chassis include the following:

•iMediaChassis series

•MediaChassis series

•IE-MediaChassis series

The IE-iMcV-E1-Mux/4 delivers 4 E1 lines to a customer's site over a protected, dedicated fiber line. In addition, one serial RS-232 line and one 10/100BaseT Ethernet line can be carried at the same time. All circuits run at full line rates with no interaction.

10/100BaseT

ISP Internet

(1 Port)

E1-Mux

Dedicated

E1-Mux

(1 Port) Customer

LAN

(4 port)

TDM Network

PSTN

Local Far End	Serial Port
Local Far End
	Console

(Network)

Host

Fiber

Dedicated

Fiber

Protection

(1+1)

(Subscriber)

Remote

(4 Port)

Customer

PABX

Console RS232

Serial Port

Remote Far End

Console

Managed Modules

The IE-iMcV-E1-Mux/4 modules are installed as a Host/Remote pair. Host or Remote configuration is selected by an onboard DIP Switch setting. The Host/Remote pair can be remotely managed when the HOST is installed in an iMediaChassis with an SNMP Management Module.

Port Interfaces

Afully-configured IE-iMcV-E1-Mux/4 includes the following ports:

•Four E1 ports on RJ-48 connectors short haul

•One 10/100BaseT twisted pair Ethernet port

•One fiber SFP port (requires SFP/155-ED module for each port)