IMC Networks MOR-F-632-120-EB82 operation manual LED Operation, 10/100BaseT Connector

Page 9

LED Operation

10/100BaseT

Connector

RS-232

Connector

E1 RJ-48

Connectors

SFP

Ports

The IE-iMcV-E1-Mux/4 features diagnostic LEDs as explained below.

10/100BaseT Connector

LNK:

OFF when port is not linked/connected

Glows green when link is established

Blinks green during data activity

FDX:

OFF when port is not connected or when running at half- duplex

Glows yellow when port is running at full duplex

Blinks yellow when collisions occur

5

Image 9
Contents IE-iMcV-E1-Mux/4 FCC Radio Frequency Interference Statement WarrantyTable of Contents Page About the IE-iMcV-E1-Mux/4 Overview IE-iMcV-E1-Mux/4 offers the following featuresProduct Application Managed ModulesPort Interfaces SFP Console Serial Port ConnectionIView2 supports the following platforms IView² Management SoftwareLED Operation 10/100BaseT ConnectorSFP Ports E1 RJ-48 ConnectorsConnector Pinout and DIP Switch Assignments E1 Port Mating Connector Pinout 10/100BaseT Ethernet Mating Connector PinoutRS-232 Serial Console Port RS-232 Port Mating Connector PinoutInstallation Instructions AutoCross FeatureSmall Form-Factor Pluggable Ports SFP Ethernet Line Setup Configuration OptionsPacket Size Auto NegotiationLink Fault Pass-Through Lfpt E1 Ports Setup Alarm LevelFX LinkLoss Fxll Loopback Console Screens Configuration Using the Console Port Login ScreenMain Menu Menu Options = Refer to the Unit Configuration ScreenPort Alarm Status Screen Unit Configuration ScreenSFP Line Status Screen Ethernet Port Status Screen Ethernet Port Configuration ScreenE1 Port Configuration Screen E1 Port Status Screen Troubleshooting Fiber Optic Port Verification E1 Port Verification Normal Operation Fiber Optic Cleaning Guidelines Electrostatic Discharge Precautions Standards/Compliance SpecificationsIMC Networks Technical Support AIS Definition of Terms/AcronymsLED Certifications Document Number 57-80400-02 A0