IMC Networks MOR-F-632-120-EB82 operation manual Troubleshooting

Page 25

Troubleshooting

•All IE-iMcV-E1-Mux/4 units are shipped configured as Host units via DIP Switch #1 = OFF. The Remote unit should be set to DIP Switch #1 = ON. Be sure to confirm that the IE-iMcV-E1-Mux/4 card is set correctly when used.

•The fiber transport is independent of all other ports and should be established first. If this is not possible, a physical fiber loopback can be used for fiber port verification. A fiber loopback will cause all connected ports to loop back their respected data.

•If the fiber is not connected, all E1 ports will send the all-ones, AIS signal. This can be physically looped back to verify E1 port operation.

21

Image 25

Contents IE-iMcV-E1-Mux/4 FCC Radio Frequency Interference Statement WarrantyTable of Contents Page About the IE-iMcV-E1-Mux/4 Overview IE-iMcV-E1-Mux/4 offers the following featuresManaged Modules Product ApplicationPort Interfaces SFP Console Serial Port ConnectionIView2 supports the following platforms IView² Management SoftwareLED Operation 10/100BaseT ConnectorSFP Ports E1 RJ-48 ConnectorsConnector Pinout and DIP Switch Assignments E1 Port Mating Connector Pinout 10/100BaseT Ethernet Mating Connector PinoutRS-232 Serial Console Port RS-232 Port Mating Connector PinoutAutoCross Feature Installation InstructionsSmall Form-Factor Pluggable Ports SFP Ethernet Line Setup Configuration OptionsPacket Size Auto NegotiationE1 Ports Setup Alarm Level Link Fault Pass-Through LfptFX LinkLoss Fxll Loopback Login Screen Console Screens Configuration Using the Console PortMain Menu Menu Options = Refer to the Unit Configuration ScreenPort Alarm Status Screen Unit Configuration ScreenSFP Line Status Screen Ethernet Port Status Screen Ethernet Port Configuration ScreenE1 Port Configuration Screen E1 Port Status Screen Troubleshooting Fiber Optic Port Verification E1 Port Verification Normal Operation Fiber Optic Cleaning Guidelines Electrostatic Discharge Precautions Standards/Compliance SpecificationsIMC Networks Technical Support AIS Definition of Terms/AcronymsLED Certifications Document Number 57-80400-02 A0