Uplink Ports
FLT | Glows yellow when a fault is detected with the fiber Uplink. Faults |
| include loss of link and |
| defined for a fiber line running at gigabit rates. |
LNK | Glows green when link is established. |
| Blinks green during data activity. |
Passwords
If the username and password are available when accessing iView², the unit can be reset back to its original factory setting with the following procedure. Open a console session by launching a Hyperterminal session with the unit. Upon completion of the boot sequence, press the Spacebar once and then type in the command cleandb. Upon completion, type in the command reboot. This will reset the username/password back to admin/admin.
If the username and password are lost for the console session, open iConfig within iView². In the Administration tab, upgrade the PROM with a backup copy of the last binary file, or load a current binary file downloaded from the IMC Networks download product page. By reloading the binary file, the username and password is removed.
If BOTH password accesses are lost, contact Technical Support at
Before using iView²
iView² is a network management application designed for Intelligent Networking Devices from IMC Networks. It features a GUI and gives network managers the ability to monitor and control products from a variety of platforms. iView² can also function as a
System Requirements
To run iView², the management PC must be equipped with the following:
•29 MB free disk space, 64 MB RAM
•Windows: NT 4.0 Service Pack 5, 2000 Professional, or XP
•Microsoft SNMP Services Installed
•Microsoft IE 4.0 or Higher (not required as default browser)
•Microsoft IIS required for Web Server version
Java versions require the following:
•25 MB free disk space, 64 MB RAM
•Any OS capable of running Java (Windows 98 or above, Solaris, LINUX)
•Java Runtime v 1.3
30