IMC Networks Giga-AcessEtherLinx-II operation manual About the Giga-AccessEtherLinX-II

Page 4

About the Giga-AccessEtherLinX-II

The Giga-AccessEtherLinX-II Series enables service providers to offer differentiated data networking or VPN services to multi-tenant building and business customers. Residing at the customer premises or at the service provider POP, Giga- AccessEtherLinX-II provides a VLAN-based Layer 2 entry point to the MAN fiber network, trunking, differentiating and grooming customer traffic. Featuring remote SNMP management, port bandwidth control, QinQ support, QoS, traffic prioritization and multicast pruning (using IGMP v1, v2), it is an ideal solution for delivering Ethernet-based services to customers quickly and cost-effectively.

Giga-AccessEtherLinX-II offers configuration access via Telnet, console, secure IP-Less, and SNMP management channels. Software upgrades can be initiated via any one of these access methods.

The Giga-AccessEtherLinX-II includes one Uplink port (either 1000Base-FX fiber or 10/100/1000 twisted pair) and four 10/100/1000 Mbps twisted pair Ethernet Downlink Ports for connecting users/LANs, and supports jumbo frame sizes of up to 9600 bytes.

The Giga-AccessEtherLinX-II offers various wavelengths for SM and MM fiber at gigabit speed; single-strand and SFP versions are also available. As a standalone unit, it is available in an internal AC or DC version.

Installing the Giga-AccessEtherLinX-II

The Giga-AccessEtherLinX-II comes ready to install; there is no hardware configuration required. All features, such as management access, qualified VLAN tags, Link Fault Pass-Through and Auto Negotiation are software configurable.

Place the Giga-AccessEtherLinX-II on a flat surface, prior to installation. Attach the cables between the Giga-AccessEtherLinX-II and each device that will be interconnected and then plug the unit into a reliable power source.

1

Image 4
Contents Giga-AccessEtherLinX-II Warranty FCC Radio Frequency Interference StatementTable of Contents About the Giga-AccessEtherLinX-II Installing the Giga-AccessEtherLinX-IIRackmount Installation Features Two Layer Qualified Q-in-Q SupportAutoCross Feature for Twisted Pair Connection Software Configurable FeaturesIP-Less Management in HOST/REMOTE configurations Auto Negotiation, Duplex Mode and SpeedPriority Queuing and Flow Control Bandwidth ControlUtility iConfig About iView² Unit ManagementAbout Console Port Configuration SNMP, Telnet and Console ManagementMain Configuration Screen Command ListAssigning IP Information Deleting Community Strings Ifstats Version Configuring VLANs Qualified Vlan SettingsPre Configured Modes Downloading FilesVlan Mode Screen Mode 1-Untagged Frames Only Mode 3- Mixed Tagged and Untagged, Block Mgmt Domain Only untagged frames are delivered to the Downlinks Page Mode 6-Port Based Extra Tag Page Mode 7- Port Based Extra Tag, Infrastructure Page Page Mode 8-VLAN Assigned Unit Control Settings Bandwidth Limiting Port Configuration System Descriptions Firmware and Unit Version InformationUsing Management Using iView² with HP OpenViewUpdate Manager Other NMS ApplicationsIP-Less Management With the Unified Management AgentFile Management for Upgrading Using Telnet LED Operation Downlink PortsBefore using iView² PasswordsUplink Ports DC Power Supply Wiring Instructions DC Power SupplyRackmount Precautions DC Power Supply Precautions Specifications Standards IMC Networks Technical SupportFiber Optic Cleaning Guidelines Electrostatic Discharge PrecautionsSafety Certifications Document Number 52-80321-00 A1