IMC Networks Giga-AcessEtherLinx-II operation manual Mode 8-VLAN Assigned

Page 25

Mode 8—VLAN Assigned

Mode 8 allows up to 64 VLAN IDs to be defined. Each port can be a tags or No-tags member of a defined VLAN. A tags member port will allow these tagged frames to enter/exit the port. A No-tags member port will add this frame at egress. Only one No-tag VLAN can be assigned to a given port, but any or all defined tags can be assigned as tags for a given port.

Mode 8 allows total flexibility by combining both Trunk and Drop port capabilities allowing both VLAN filtering and tagging on the same unit.

22

Image 25

Contents Giga-AccessEtherLinX-II FCC Radio Frequency Interference Statement WarrantyTable of Contents Installing the Giga-AccessEtherLinX-II About the Giga-AccessEtherLinX-IIFeatures Two Layer Qualified Q-in-Q Support Rackmount InstallationAutoCross Feature for Twisted Pair Connection Software Configurable FeaturesAuto Negotiation, Duplex Mode and Speed IP-Less Management in HOST/REMOTE configurationsPriority Queuing and Flow Control Bandwidth ControlAbout iView² Unit Management Utility iConfigSNMP, Telnet and Console Management About Console Port ConfigurationCommand List Main Configuration ScreenAssigning IP Information Deleting Community Strings Ifstats Version Qualified Vlan Settings Configuring VLANsPre Configured Modes Downloading FilesVlan Mode Screen Mode 1-Untagged Frames Only Mode 3- Mixed Tagged and Untagged, Block Mgmt Domain Only untagged frames are delivered to the Downlinks Page Mode 6-Port Based Extra Tag Page Mode 7- Port Based Extra Tag, Infrastructure Page Page Mode 8-VLAN Assigned Unit Control Settings Bandwidth Limiting Port Configuration Firmware and Unit Version Information System DescriptionsUsing iView² with HP OpenView Using ManagementUpdate Manager Other NMS ApplicationsIP-Less Management With the Unified Management AgentFile Management for Upgrading LED Operation Downlink Ports Using TelnetBefore using iView² PasswordsUplink Ports DC Power Supply DC Power Supply Wiring InstructionsRackmount Precautions DC Power Supply Precautions IMC Networks Technical Support Specifications StandardsElectrostatic Discharge Precautions Fiber Optic Cleaning GuidelinesSafety Certifications Document Number 52-80321-00 A1