SECTION
Conditioning the Battery
NOTE: The definition of conditioning the battery is simply charging the battery for a full six hour cycle before the initial use of the product.
1.Disconnect the battery from the compressor.
2.Connect the power cable (AC) or auto adapter cable (DC) to the battery.
3.Charge the battery for a full six hour cycle.
The orange light will indicate if the battery is properly charging. Battery charging to full capacity is dependent upon many factors. Charging of the battery requires at least 6 hours. Failure to condition the battery prior to its first use may result in a reduced battery life expectancy. To assure maximum life performance of the battery after conditioning, leave the battery connected to a power source when not in use.
The battery operation time depends upon the charge condition of the battery, the temperature, the storage time of the battery prior to use, the amount of medication used for treatment, and the number of charge/discharge cycles. The manufacturer of the battery recommends the battery be conditioned every one or two months.
Part No 1150755 | 23 | Stratos™Portable Plus |