Intellinet Network Solutions 509077 user manual Wireless

Page 33

TCP/IP Printing (LPR/IPP/RAW): The MFP server supports the TCP/IP network protocol and LPR/IPP/RAW printing protocols. By default, these protocols are enabled.

5.4.2 Wireless

If you want to use the MFP server through a wireless LAN, set up the MFP server through Ethernet first and make sure your wireless LAN setting is correct. After setting the wireless LAN, unplug the Ethernet cable and restart the MFP server. Then you can start to use the MFP server through the wireless LAN. If the wireless configuration doesn’t work, plug in the Ethernet cable again, re-start the MFP server and configure the MFP server through Ethernet until the wireless LAN settings are correct.

You can enable/disable the wireless function and set up the wireless parameters

—including Function and ESSID — for the MFP server from here. You can manually set the wireless network that you want to connect on this screen or use the Site Survey screen to automatically search for an available wireless network and associate with it.

Function: Allows you to disable, enable or let the MFP server auto-select to connect to a wired or wireless network. If “Disable” is selected, the MFP server can only connect to the network through wired Ethernet. If “Enable” is selected, the MFP server can only connect to the network through a wireless LAN. If “Auto” is selected, the MFP server can automatically decide to enable or disable the wireless function.

The MFP server only can work in Ethernet or wireless LAN mode. It can’t work in both Ethernet and wireless LAN mode at the same time. When the MFP server starts up, it will auto-detect if the LAN port is connected to an active network by an Ethernet cable. If the MFP server is connected to an active network by Ethernet cable when starting up, the MFP server will run in Ethernet mode. If the MFP server is not connected to an active network by Ethernet cable when starting up, the MFP server will run in wireless LAN mode. The MFP server default mode is “Auto.”

WEB MANAGEMENT

33

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Port Page Safety & compliance statements RSS-210 Compliance Statement Safety & Compliance Contents All-in-One MFP Server Mode MFP Server ModeMFP print server Modes Using Your All-in-one printer Scanning PrintingExample Epson Mfp manager Reading Memory CardsMFP Server List MFP Server List My Favorite List My FavoriteAuto Connect List Quick Setup General Settings Option SettingsServer Configuration IntroductionSearch for an MFP Server If a particular MFP server is Search for All Available MFP Servers Status of the MFP Server Set Up the MFP Server General Configuration IP Address Assignment TCP/IP ConfigurationSystem Configuration Infrastructure Mode Wireless ConfigurationWEP Security Mode Server Configuration WPA-PSK & WPA2-PSK Security Modes MFP Server Management IP Address User Name admin Password LoginWeb Management ReportDevice Status System StatusPrinter Status Setup Wizard System General Settings3 TCP/IP Status Advanced Settings Admin PasswordWireless Encryption Site SurveyWPA-PSK Mode Security Mode 3 TCP/IP WPA2-PSK Mode Security ModeSave Settings Load DefaultSystem Tools Lpr printing Upgrade FirmwareWhen the Add Printer Wizard screen displays, click Next LPR Printing LPR Printing LPR Printing LPR Printing Raw printing RAW Printing RAW Printing RAW Printing Select RAW and then click OK Click Finish RAW Printing Ipp printing System SetupMFP Server Side Client SideWhen the Add Printer Wizard screen displays, click Next IPP Printing IPP Printing Mac MFP server Installation with MAC OSServer Installation with MAC OS Server Installation with MAC OS How is the IP address of the MFP server changed? TroubleshootingSpecifications Package ContentsGeneral
Top Page Image Contents