Huawei HG532S manual Configuring a Wireless Account

3.2Configuring a Wireless Account

The configuration wizard page is displayed when wireless parameters have not been modified. To set the wireless network name and password for wireless connections on the wizard page, do as follows:

Step 1 Log in to the HG532s's web-based configuration utility.

Step 2 In the displayed Quick Configure Home Gateway: Wireless Network page. Set WLAN SSID and Key, and click Next.

Check the label on the HG532s's rear panel for SSID and WLAN Key. The preceding configuration needs to be performed only once. You can also configure the wireless network name and password by choosing Basic > WLAN. For details, see section 6.3 "Changing the Wireless Network Name and Password".

After you set the wireless network name and password, the home page of

the web-based configuration utility is displayed. A navigation menu is displayed on the left.

3.3Configuring a Dial-Up Connection for Internet Access

The HG532s works in bridge mode by default. To set up a dial-up connection for Internet access, you must install and configure PPP dial-up software. The following example uses a computer running the Windows XP operating system to describe how to set up a dial-up connection:

Step 1 Choose Start > All Programs > Accessories > Communications > Network Connections.

Step 2 In Network Tasks, click Create a new connection. In the New Connection Wizard window, click Next.

Step 3 Select Connect to the Internet, and click Next.

Step 4 Select Set up my connection manually, and click Next.

Step 5 Select Connect using a broadband connection that requires a user name and password, and click Next.

12