3.2.1 Configure the Profile
System Configuration
Parameter | Description |
Profile Name | Define a recognizable profile name for you to identify the different |
| networks. |
SSID | The SSID (up to 32 printable ASCII characters) is the unique |
| name identified in a WLAN. The ID prevents the unintentional |
| merging of two |
| You may specify a SSID for the card and then only the device with |
| the same SSID can interconnect to the card. If you want to add |
| one of the networks nearby to the profile list, pull down the menu, |
| all the networks nearby will be listed and you can add one of them |
| to the profile list. |
Power Saving Mode | The power saving function is only available when the network type |
| is in Infrastructure. |
| CAM(Constantly Awake Mode) – The card will always set in |
| active mode. |
| Power Saving Mode – Enable the card in the power saving mode |
| when it is idle. |
| CAM When AC Power – Select this option to automatically switch |
| the card from power saving mode to CAM mode while the power |
| of your laptop computer is supplied by the AC power but not |
| battery. |
10