
| On – Always enable the protection mode. |
| Off – Always disable the protection mode. |
|
|
Parameter | Description |
|
|
ADHOC_OFDM | When the network type is in Ad Hoc mode, that the card can only |
| work in 11b data rate. It is defined by |
| want to enable the data rate up to 54Mbps (11g), select |
| “ADHOC_OFDM”. |
Tx Rate | There are several options including |
| Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select. |
| When the “Auto” is selected, the device will choose the most |
| suitable transmission rate automatically. The higher data rate you |
| designated in the network, the shorter distance is allowed |
| between the card and the wireless stations. |
| When the wireless mode is “802.11 B only”, the maximum data |
| rate is 11Mbps (11b) so that there are only “Auto/1/2/5.5/11Mbps” |
| options you can select. |
Turn Off RF Button | If you want to turn off the radio of the card temporarily, click this |
| button. To turn on the radio, click this button again. |
3.6About
By choosing this option, you can click the hyperlink to connect to the website for the information of the wireless chipset vendor and review basic information about the Utility such as the Driver, Utility and EEPROM Version. The MAC Address of the card is displayed in the screen as well.
18