GS108T Smart Switch Hardware Installation Guide
Step 2: Applying Footpads and Wall Mounting
1.Attach one rubber foot pad into each of the four concave depressions on the base of the switch. (The switch ships with four
Note: These footpads cushion the switch against shock and vibration. They also provide for ventilation space between stacked switches.
2.To mount the switch on a wall (optional), install the two provided screws in positions that correspond to the slots on the bottom side of the GS108T, then mount the switch.
Step 3: Checking the Installation
Before you apply power, inspect the equipment thoroughly to:
•Verify that all cables are installed correctly.
•Check that cables are not damaged and that cable routing does not interfere with equipment to create a safety hazard.
•Ensure that all equipment is mounted properly and securely.
Step 4: Connecting Devices to the Switch
The following procedure describes how to connect devices to the switch’s
Installation |