Magnum P62-Series Hardened Switches | Installation and User Guide (12/02) |
20.1cm) center-to-center. Four user-supplied screws, ¼” max diameter, attach the P62’S base plate to the vertical mounting surface. The PSX Power Source mounting is similar. The mechanical drawings in Figures 1 & 2 below provide the mounting holes measurement information for the PSX unit (mounted on top, if present) and for the Magnum P62-Series unit.
3.35” (8.5)
3.35” (8.5) 3. 35” (8.5)
7. 92” (20.1)
Fig. 2
3. 35” (8.5)
Mounting Hole Dimensions, inches & (cm)
www . GarrettCom . com
Installation and User Guide
Hardened Ethernet Switches Installation and User Guide
Trademarks
GarrettCom, Inc
Contacting GarrettCom, Inc
Personal Switches, 10/100Mb
Stackable Hubs, Snmp Optional
Personal Hubs, 10Mb series
Table of Contents
Specifications
Technical Specifications Ports Performance
Network Standards
Maximum Ethernet Segment or Domain Lengths
Power Supply Internal 24VDC and -48VDC Power Supply
LED Indicators
Fiber Ports # 1
Mechanical
Mtbf Bellcore method Agency Approvals
Ordering Information
Parts
Managed P62-Series mP62 Hardened Switches
Introduction
Inspecting the Package and Product
Product Description
Www . GarrettCom . com
Www . GarrettCom . com
Managed Network Software MNS-mP for Magnum mP62
Connecting the Console Terminal to Magnum mP62 Management
Console port
Fiber port, SC Connectors
Frame Buffering and Latency
Www . GarrettCom . com
Two future-proof fiber ports with SC connectors
Top-mounted LEDs for convenient viewing
24VDC and -48VDC Int. & 125V/250VDC ext. through PSX-T
Managed mP62’s with MNSmP software for Managed network
Applications
Example
Example 3. Magnum mP62
Installation
Locating Magnum P62F-Series 10/100Mb Ethernet Switches
Mounting dimensions
Mounting position and materials
Mounting Hole Dimensions, inches & cm
Connecting Ethernet Media, and Special Strain-relief feature
Media Ieee Standard
Connecting Fiber Optic SC-type, Snap-In
Connecting Fiber Optic ST-type, Snap-In Optional
Connecting Single-Mode Fiber Optic
Power Budget Calculations for P62-Series Fiber Media
Km, fdx
DC Power Terminals +, -,internally floating
P62 -48V, 24VDC Installation
Power the P62-5V models w/Ext AC Power Supply PSX-A
Power the P62-5V w/DC Pwr Supply PSX-T at 125/250 VDC
Power Output 5VDC, 3Amps
Power Capacity 15 watts
Operating Shock
Cable Strain Relief Feature on all P62-Series models
Dual-Speed Functionality, and Switching
Switching, Filtering and Forwarding
Switching, Address Learning
Operation
LED’s for P62-Series Hardened Switch
Auto-negotiation and Speed-sensing
Troubleshooting
Before Calling for Assistance
When Calling for Assistance
Return Material Authorization RMA Procedure
Appendix a Warranty Information
No Problem Found
Shipping and Packaging Information