Add New Hardware Wizard - Human Interface Device (Windows 98 SE Instal- lation)
1.Next, the Wizard automatically installs the USB Human Interface Device. The Add New Hardware Wizard (5) indicates that it has found the USB Human Interface Device. Click Next.
2.The Wizard prompts you to search for the best driver for your device or select the driver you want from a displayed list (2). Select Search for the best driver for your device. Click Next.
3.Windows now searches for new drivers in a specific location (3). Uncheck all the boxes. Click Next.
4.The Wizard indicates that it is ready to install the best driver for this device (6). Click Next to install the driver.
5.Click Finish when the Wizard is complete.
Add New Hardware Wizard - USB Audio Device (Windows 98 SE & Windows Me Installation)
1.Next, the Wizard automatically installs the USB Audio Device. The Add New Hard- ware Wizard (7) indicates that it has found the USB Audio Device. Click Next.
2.The Wizard prompts you to search for the best driver for your device or select the driver you want from a list (2). Select Search for the best driver for your device. Click Next.
3.Windows searches for new drivers in a specific location (3). Uncheck all the boxes. Click Next.
4.The Wizard indicates that it is ready to install the best driver for this device (8). Click Next to install the driver.
5.Click Finish when the Wizard is complete.
If the Wizard Cannot Locate the Driver
If the Add New Hardware Wizard cannot locate the driver, insert your Windows Operating System
Note: Do not unplug the USB connector from the computer while an application that uses USB audio is running. This could cause a system crash.
5.Adjusting the Speaker Volume, Side Tone and Micro- phone Levels
•Test that the speaker volume in your headset is working and set at a comfortable level by adjusting the blue volume rocker control referenced in the introduction dia
7