Zenith XBS344 warranty Connections Basic TV Connections, Optional TV Connections

Page 12

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on the capabilities of your TV.

RF coaxial connection

Connect the RF.OUT jack on the DVD/VCR Receiver to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).

ote

If you use this connection, tune the TV to the DVD/VCR Receiver’s RF output channel (CH 3 or 4).

How to set the DVD/VCR Receiver’s RF output chan- nel

While the DVD/VCR Receiver is turned off, press and hold CH/PRESET (v/V) on the front panel for about five seconds to change the RF output channel (CH 03 or CH 04). “RF 03” or “RF 04” appears in the display win- dow.

Audio/Video connection

1

Connect the DVD/VCR VIDEO OUT jack on the

DVD/VCR Receiver to the video in jack on the TV

using the supplied video cable (V).

2 Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.

ote

If you use this connection, set the TV’s source selector to VIDEO.

Typical TV Connections Panel

ANTENNA

AUDIO INPUT

VIDEO

COMPONENT/PROGRESSIVE

S-VIDEO

INPUT

INPUT

 

SCAN VIDEO INPUT

INPUT

 

L

R

L

Pr

Pb

Y

 

R

A

V

C

S

DVD+VCR Connections Panel

Optional TV Connections

ote

The S-VIDEO OUT and COMPONENT/PROGRESSIVE SCAN VIDEO OUT connection options below only work with DVD playback. The tuner and VCR will still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jack. (See left)

S-Video Connection

1

Connect the S-VIDEO OUT jack on the DVD/VCR

Receiver to the S-Video in jack on the TV using the

supplied S-Video cable (S).

2 Connect the Left and Right AUDIO OUT jacks on the DVD/VCR Receiver to the audio left/right in jacks on the TV using the supplied audio cables

(A).

Component Video (Color Stream®) connection

1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD/VCR Receiver to the corresponding in jacks on the TV using user-sup- plied Y Pb Pr cables (C).

2 Connect the Left and Right AUDIO OUT jacks of the DVD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.

Progressive Scan (ColorStream® pro) connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/VCR Receiver’s progressive scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Receiver.

1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD/VCR Receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).

2 Connect the Left and Right AUDIO OUT jacks of the DVD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.

otes

–Set Progressive Scan to “On” on the DVD setup menu for progressive signal, see page 21.

–Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Installation and Operating Guide Warranty Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Remote Control Operating Range Remote Control Battery InstallationBefore Use Playable DiscsPrecautions About SymbolsSelecting the Viewing Source Power VolumeFront Panel EjectIndicates sound mode is Display Window OverviewRemote Control Overview Rear Panel Connections Overview Video OUT DVD OUTDigital Audio in Optical Connecting Antenna/Cable TV to DVD/VCR Receiver ConnectionsConnections Basic TV Connections Optional TV ConnectionsConnections Speaker System Connections Speaker PositioningAbout Ferrite Core Accessory Audio/Video A/V Connections to DVD/VCR Receiver Connections Radio Antenna ConnectionsDigital Device Connections Game Device Digital Set Top Box Rear of DVD/VCR ReceiverSelecting Input/Output Sources DVDVCR FM/AMSound Mode Volume ControlMuting While DVD is insertedVCR Operation Setup On-Screen Display OSD On-Screen Menus SetupMenu Selection VCR Operation Setup VCR Setup Menu Options Channel SelectionVCR Operation Setup Setting the Clock Auto Clock SetManual Clock Set DVD Operation Setup DVD Operational Overview Playback Status Indicator IconsOn-Screen Display On-screen display operationDVD Operation Setup Initial Settings PictureBasic Menu Operation LanguageDVD Operation Setup Speaker setupOthers DRC/Vocal/AutoPlay Rating DVD VCR Operation Normal Playback Special Effect PlaybacksTimer Recording VCR Operation Basic RecordingTo pause recording To record one TV program while watching anotherChecking Erasing Timer Record Programming VCR OperationProgram Priority Instant Timer Recording Checking the Recording TimeTo extend the Recording Time Dubbing and EditingMultichannel TV Sound Indicator MTS VHS Hi-Fi Stereo System MTS BroadcastPlayback with Hi-Fi Stereo Audio Sound MTS Multi-Channel TV SoundVCR Operation Tape Counter Memory Feature Additional InformationGeneral Features DVD Operation Playing DVDsDVD Operation General Features Special DVD Features Audio CD and MP3 Disc Operation Pause CD MP3 Selecting Tracks CD MP3Repeat Track/All/Off CD MP3 Search CD MP3Jpeg File Operation Viewing Jpeg Files on a Disc Jpeg Selecting other FilesStill Picture To flip the pictureProgrammed Playback CD MP3 Programmed Playback with Audio CDs or MP3 DiscsRepeat Programmed Tracks Erasing Track from the Program ListSpeaker Setup Radio Operation Listening to the RadioTo Clear Stored Radio Stations Repeat steps 2 to 5 to store other stationsPress 2 to move to the station name column Troubleshooting Symptom Cause SolutionReference Symptom Cause Correction Moisture CondensationLanguage Code List Code LanguageCountry Code List Code CountrySpecifications FM Tuner AM TunerSpeakers Reference Warranty Period HOW Service is Handled This Limited Warranty does not Apply toIssue O Customer INTER-ACTIVE Center Numbers
Top Page Image Contents