Zenith XBS344 warranty VCR Operation, Checking Erasing Timer Record Programming, Program Priority

Page 26

VCR Operation (Continued)

10

Use V to choose the SPEED option.

Use b/B to choose the desired recording

 

speed (AUTO, SP or SLP).

 

AUTO mode determines how much tape is left and

 

switches speed from SP to SLP, if necessary, to

 

complete recording the program. There will be some

 

picture and sound distortion at the point of the speed

 

change.

11

Use V to choose the REPEAT option.

Use b/B to choose the desired repeat (ONCE,

WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year. WEEKLY event....for recording up to 8 programs on a

certain day of every week.

DAILY event....for recording up to 8 programs at the

same time(s) Monday through Friday.

ip

If the input data is wrong, use v to select the data and correct it using b/B.

12

Press MENU, the program will be memorized

by the DVD/VCR Receiver.

TIMER indicator lights in the display window.

If the program preset time has past, the PAST TIME PROGRAMMED message will appear on the TV screen. Return to the incorrect program and program it with the correct time.

If you had entered a past date, timer recording will be performed on that date of the next year. Additional programs may be entered by repeating steps 1-12.

Cable Users: If your cable hookup is via a TV converter box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD/VCR Receiver.

ip

If you are finished programming and you want to set the DVD/VCR Receiver to record the programs you have entered,

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD/VCR Receiver. The DVD/VCR Receiver is now set to record the preset programs.

otes

If the power fails or the DVD/VCR Receiver is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer must be reset when power is restored. Reset the clock according to instructions.

After setting up a timer recording, recording will start if no other timer recordings are scheduled to occur at the same time (see “Program Priority” below).

Checking (Erasing) Timer Record Programming

Programming can be checked whenever the DVD/VCR Receiver is turned on.

1.Press MENU and the MAIN menu will appear.

2.Use v/V to choose the PROGRAM menu.

Press MEMORY/ENTER and the PROGRAM menu will appear.

3.Use b/B to select a program you want to check or erase. If you want to erase the program, press

CLEAR.

4.Press MENU to return to the TV screen.

Program Priority

If the starting and ending times of two or more timer recordings overlap on the same day, priority is given to

the earliest recording. For

example, in the diagram at

left Program number 2 will

not be recorded until

Program number 1 is fin- ished. The first part of

Program number 2 will not be recorded. Likewise, Program number 3 will not be recorded until Program number 2 is finished, and so on.

26

Image 26
Contents Installation and Operating Guide Warranty Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Before Use Remote Control Operating RangeRemote Control Battery Installation Playable DiscsSelecting the Viewing Source PrecautionsAbout Symbols Front Panel PowerVolume EjectIndicates sound mode is Display Window OverviewRemote Control Overview Digital Audio in Optical Rear Panel Connections OverviewVideo OUT DVD OUT Connecting Antenna/Cable TV to DVD/VCR Receiver ConnectionsConnections Basic TV Connections Optional TV ConnectionsAbout Ferrite Core Connections Speaker System ConnectionsSpeaker Positioning Digital Device Connections Accessory Audio/Video A/V Connections to DVD/VCR ReceiverConnections Radio Antenna Connections Game Device Digital Set Top Box Rear of DVD/VCR ReceiverVCR Selecting Input/Output SourcesDVD FM/AMMuting Sound ModeVolume Control While DVD is insertedMenu Selection VCR Operation Setup On-Screen Display OSDOn-Screen Menus Setup VCR Operation Setup VCR Setup Menu Options Channel SelectionManual Clock Set VCR Operation Setup Setting the ClockAuto Clock Set On-Screen Display DVD Operation Setup DVD Operational OverviewPlayback Status Indicator Icons On-screen display operationBasic Menu Operation DVD Operation Setup Initial SettingsPicture LanguageOthers DRC/Vocal/AutoPlay DVD Operation SetupSpeaker setup Rating DVD VCR Operation Normal Playback Special Effect PlaybacksTo pause recording Timer RecordingVCR Operation Basic Recording To record one TV program while watching anotherProgram Priority Checking Erasing Timer Record ProgrammingVCR Operation To extend the Recording Time Instant Timer RecordingChecking the Recording Time Dubbing and EditingPlayback with Hi-Fi Stereo Audio Sound Multichannel TV Sound Indicator MTSVHS Hi-Fi Stereo System MTS Broadcast MTS Multi-Channel TV SoundVCR Operation Tape Counter Memory Feature Additional InformationGeneral Features DVD Operation Playing DVDsDVD Operation General Features Special DVD Features Audio CD and MP3 Disc Operation Repeat Track/All/Off CD MP3 Pause CD MP3Selecting Tracks CD MP3 Search CD MP3Still Picture Jpeg File Operation Viewing Jpeg Files on a Disc JpegSelecting other Files To flip the pictureRepeat Programmed Tracks Programmed Playback CD MP3Programmed Playback with Audio CDs or MP3 Discs Erasing Track from the Program ListSpeaker Setup To Clear Stored Radio Stations Radio OperationListening to the Radio Repeat steps 2 to 5 to store other stationsPress 2 to move to the station name column Troubleshooting Symptom Cause SolutionReference Symptom Cause Correction Moisture CondensationLanguage Code List Code LanguageCountry Code List Code CountrySpecifications Speakers FM TunerAM Tuner Reference Issue O Warranty Period HOW Service is HandledThis Limited Warranty does not Apply to Customer INTER-ACTIVE Center Numbers