GarrettCom Magnum ST80 manual Installation, Table of Contents

Page 4
Magnum ST80 Stackable

Stackable Personal Hubs

Installation and User Guide (04/01)

TABLE OF CONTENTS

 

Page

1.0 SPECIFICATIONS

1

1.1. Technical Specifications

1

1.2 ORDERING INFORMATION

3

2.0 INTRODUCTION

4

2.1

Inspecting the Package and Product

4

2.2

Product Description

5

2.3

Features and Benefits

8

2.4

Applications

9

3.0 INSTALLATION

11

3.1

Table-Top or Shelf

Mounting

11

3.2

Wall (or Vertical Surface) Mounting (for non-stacked units only)

12

3.3

Combining and Mounting Stacked Units

12

3.4

Twisted Pair Segment Connections

13

3.5

AUI Connection

13

3.6

BNC Connection (Model ST80-B only)

15

3.7

Fiber Optic Connection (Model ST80-F only)

15

3.8

Switchable Up-Link Option

16

3.9

Stacking the ST80 Personal Hubs

16

3.10 Cascading ST80 Personal Hubs with the Up-Link port

18

4.0 OPERATION

19

4.1

Functional Operation, Use of LED Indicators

19

4.2

Using the Up-Link switch

20

4.3

Using the BNC internal termination switch (Model ST80-B only)

20

4.4

Using the Stack Enable switch

21

5.0 TROUBLESHOOTING

22

5.1

Before Calling for Assistance

22

5.2

When Calling for Assistance

23

5.3

Return Material Authorization (RMA) Procedure

23

5.4

Return Shipping and Packaging Information

24

APPENDIX A: WARRANTY INFORMATION

24

Revisions

Rev B 04/01 : Change the company name to GarrettCom, Inc. (Formerly it was Garrett Communications). There are no changes to the content of the material at this time

Rev A 06/95 : This revision is the initial release of the Personal Hub user manual.

www . GarrettCom . com

iv

Image 4
Contents Personal Hub Personal Hub TrademarksGarrettCom, Inc Contacting GarrettCom, IncInstallation Table of ContentsMagnum Line Technical Specifications Performance Power Supply ExternalConnectors Maximum Ethernet Segment LengthsSwitches DimensionsWeight WarrantyOrdering Information Model DescriptionIntroduction Inspecting the Package and ProductNetwork Product DescriptionPort Connectors Stack Enable Switch IRBStackable Personal Hubs Installation and User Guide 04/01 Features and Benefits Expandable Design Installation VersatilityLEDs Simplify Network Installation and Maintenance Low cost, stand-alone 10BASE-T connectivityTo existing network via switchable Up-Link port ApplicationsFiber backbone Connection Installation Power SupplyLED will Illuminate Power Jack ExternalWall or Vertical Surface Mounting for non-stacked units only Combining and Mounting Stacked UnitsTwisted Pair Segment Connections AUI ConnectionAUI Pin Assignments Function ShellBNC Connection Model ST80-B only Fiber Optic Connection Model ST80-F onlySwitchable Up-Link Feature Stacking the ST80 Personal HubsIncreased port capacity via stacking Switch in X position Cascading the ST80 Personal Hub with the Up-Link portFunctional Operation, Use of LED Indicators OperationUsing the Up-Link switch Using the BNC Internal Termination Switch Model ST80-B onlyUsing the Stack Enable switch Troubleshooting Before Calling for AssistanceReturn Material Authorization RMA Procedure When Calling for AssistanceNo Problem Found Shipping and Packaging Information