GarrettCom Magnum ST80 manual Introduction, Inspecting the Package and Product

Page 9

Stackable Personal Hubs

Installation and User Guide (04/01)

2.0INTRODUCTION

This section describes the ST80 Stackable Personal Hub, including appearance, features and possible applications.

2.1Inspecting the Package and Product

Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage which you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included.

This package should contain:

1 Magnum ST80-series Stackable Personal Hub

1External Power Supply, either 115v 60 Hz or 230v 50 Hz

1Velcro® Tape section, approximately 3 inches in length

2L-shaped stacking /mounting brackets

4Metal screws for optional use with stacking/mounting brackets

1Installation and User Guide

1Product Registration Card

Remove the Magnum Stackable Personal Hub from the shipping container. Be sure to keep the shipping container should you need to ship the unit at a later date. To validate the product warranty please complete and return the enclosed Product Registration Card to GarrettCom, Inc. as soon as possible.

In the event there are items missing or damaged, contact your supplier. If you need to return the unit, try to use the original shipping container. Refer to Section 5, Troubleshooting, for specific return procedures.

www . GarrettCom . com

4

Image 9
Contents Personal Hub Trademarks Personal HubContacting GarrettCom, Inc GarrettCom, IncTable of Contents InstallationMagnum Line Power Supply External Technical Specifications PerformanceConnectors Maximum Ethernet Segment LengthsDimensions SwitchesWeight WarrantyModel Description Ordering InformationInspecting the Package and Product IntroductionProduct Description NetworkPort IRB Connectors Stack Enable SwitchStackable Personal Hubs Installation and User Guide 04/01 Installation Versatility Features and Benefits Expandable DesignLEDs Simplify Network Installation and Maintenance Low cost, stand-alone 10BASE-T connectivityApplications To existing network via switchable Up-Link portFiber backbone Connection Power Supply InstallationLED will Illuminate Power Jack ExternalCombining and Mounting Stacked Units Wall or Vertical Surface Mounting for non-stacked units onlyAUI Connection Twisted Pair Segment ConnectionsShell AUI Pin Assignments FunctionFiber Optic Connection Model ST80-F only BNC Connection Model ST80-B onlyStacking the ST80 Personal Hubs Switchable Up-Link FeatureIncreased port capacity via stacking Cascading the ST80 Personal Hub with the Up-Link port Switch in X positionOperation Functional Operation, Use of LED IndicatorsUsing the BNC Internal Termination Switch Model ST80-B only Using the Up-Link switchUsing the Stack Enable switch Before Calling for Assistance TroubleshootingWhen Calling for Assistance Return Material Authorization RMA ProcedureShipping and Packaging Information No Problem Found