External -48VDC Power Supply Optional, Packaging

Magnum P80F & P80C Personal Switches

Installation and User Guide (07/03)

External -48VDC Power Supply (Optional)

Power Input Voltage: 36 to 70 VDC (auto ranging), “-, GND, +”

Power Consumption: 8 watts typical, 10 watts max.

Network Cable Connectors - for eight RJ-45 shielded female ports and 1 fiber port 100Mbps: Category 5 UTP/STP, fiber (50/125, 62.5/125, 9/125 micron)

10 Mbps: Category 3, 4, 5 UTP (Note: auto-sensing does not sense cable type)

Maximum Load per port: 60 mA

Up-Link, Port # 1 or 1SW

Port # 1 (switched RJ-45) has a manual crossover (MDIX up-link) switch for connection to a central switch or to another P80F, P80C (or equal) unit. The up- link port # 1 is auto-sensing for speed, and its auto-negotiating up-link feature works the same at 10 Mbps or 100Mbps speed and at full- or half-duplex mode.

Full- or Half-Duplex selection on switched Ports # 2 or 2SW for Magnum P80F

Manual switch selects fiber port for FDX or HDX. See Section 4.3 for details.

Full-Fixed or Auto-negotiation selection on switched Ports # 2 or 2SW for Magnum P80

Manual switch selects port #2 for “FF” or “A”. See Section 4.3 for details.

Packaging

Enclosure: Rugged high-strength sheet metal. Metal mounting clips included. Suitable for wiring closet shelf, wall or desktop mounting. Dimensions: 1.25 in H x 6.75 in W x 5.0 in D (3.2 cm x 17.1 cm x 12.7 cm) Weight (of Switch unit): 1.0 lb. (455 g.)

Weight (of power supply unit): 1.0 lb. (455 g.)

Cooling method: Convection

LED Indicators

PWR: Steady On when power applied

ERROR: Self-test at power up failed

SPEED (with LINK ON): ON = 100Mbps; OFF = 10 Mbps

LINK/ACT: Steady On for LINK with no traffic, blinking indicates port is transmitting / receiving.

F/H: ON = full-duplex, OFF = half-duplex

Agency Approvals
UL Listed (UL 1950), cUL, CE
Emissions: meets FCC Part 15, Class B
Warranty: Three years, return to factory	Made in USA

www . GarrettCom . com