Inspecting the Package and Product | GarrettCom P80C, P80F guide

Magnum P80F & P80C Personal Switches

Installation and User Guide (07/03)

2.0INTRODUCTION

2.1Inspecting the Package and Product

Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included.

This package should contain:

1Magnum P80F Personal Switch with a Fiber Port, or Model P80C with all copper ports.

1External Power Supply, 5VDC from either 115v 60Hz or 230v 50Hz

1Set of metal clips and screws for secure shelf or wall-mounting

1Installation and User Guide

1Product Registration Card

Remove the Magnum P80F or P80C Personal Switch from the shipping container. Be sure to keep the shipping container should you need to ship the unit at a later date. To validate the product warranty, please complete and return the enclosed Product Registration Card to GarrettCom as soon as possible.

In the event there are items missing or damaged, contact your supplier. If you need to return the unit, use the original shipping container. Refer to Chapter 5, Troubleshooting, for specific return procedures.

2.2Product Description - General

The P80-series Personal Switches provide the performance of a built-in 100Mb switched fiber link upstream, coupled with the convenience of switched 10/100Mb copper ports for workplace LAN connections, all in one compact unit.

Magnum P80F “Future-proof Fiber” models have been designed with one full-duplex 100Mbps switched fiber port, and seven of “N-way” switched RJ-45 with full / half-duplex 10/100 auto-negotiating RJ-45 ports. The P80C “Copper” model has been designed with all eight RJ-45 switched ports with “N-way” x half/full duplex capability and functions as 10/100 auto-

www . GarrettCom . com