GarrettCom P80F, P80C manual Technical Specifications Ports Performance, Network Standards

Page 6

Magnum P80F & P80C Personal Switches

Installation and User Guide (07/03)

1.0SPECIFICATIONS

1.1Technical Specifications

Ports Performance

When a port is operating at 100Mbps: Data Rate: 100Mbps

When a port is operating at 10 Mbps: Data Rate: 10 Mbps

Network Standards

100Mb: Ethernet IEEE 802.3u, 100BASE-TX, 100BASE-FX

10 Mb: Ethernet IEEE 802.3, 10BASE-T

Auto-sensing for speed: IEEE 802.3u

Packet-Processing Between Domains

Filtering and Forwarding Rate from 100Mbps ports: 148,800 pps max

Filtering and Forwarding Rate from 10 Mbps ports: 14,880 pps max.

Processing type: Store and Forward

Auto-learning: 16K address table, shared for all traffic domains

Packet buffers: 512KB, dynamically shared on all domains

Latency (not including packet time): 100 to 10 Mbps: 5µs 10 to 100Mbps: 5µs

Path Delay Value: 50 BT on all ports

Maximum Ethernet Segment (or Domain) Lengths

10BASE-T (Unshielded twisted pair)

- 100 m (328 ft)

100BASE-TX (CAT 5 UTP)

- 100 m (328 ft)

100BASE-FX, half-duplex: (multi-mode)

- 412 m (1350 ft)

100BASE-FX, full-duplex: (multi-mode)

- 2.0 km (6,562 ft)

100BASE-FX, half-duplex: (single-mode)

- 412 m (1350 ft)

100BASE-FX, full-duplex: (single-mode)

- 20.0 km (65,620 ft)

100BASE-FX, full-duplex: (single-mode, long)

- 40.0 km (131,240 ft)

Operating Environment

 

Ambient Temperature:

32ºF to 120ºF (0ºC to 50ºC)

Storage Temperature:

-5ºC to 160ºF (-20ºC to 70ºC)

Ambient Relative Humidity: 10% to 95% (non-condensing)

Power Supply (External)

 

Input:

95-125 vac at 60Hz for “-d” Models

 

200-250 vac at 50Hz for “-i” Models, which have IEC

 

power cable connector in the external power unit.

Output:

5VDC, 2Amps

Polarity:

center positive, shell negative

Power Consumption: 8 watts typical, 10 watts max.

www . GarrettCom . com

2

Image 6
Contents Magnum P80F & P80C Personal Switches Trademarks GarrettCom, Inc Contacting GarrettCom, IncMagnum Line Revisions Network Standards Technical Specifications Ports PerformancePower Supply External Maximum Ethernet Segment or Domain LengthsUp-Link, Port # 1 or 1SW External -48VDC Power Supply OptionalLED Indicators PackagingMagnum P80F, 10/100 Personal Switch with a 100Mb Fiber Port Ordering InformationInspecting the Package and Product Product Description GeneralFiber ST above Fiber SC aboveMagnum P80C chassis with all RJ-45 Copper ports Up-link Port 1SW for CascadingFiber port, ST or SC Connector for Model P80F 100Mbps Fiber port, ST-type mmFrame Buffering and Latency „ Top-mounted LEDs for convenient viewing „ Up-Link on port # 1 for a high speed copper connection ApplicationsPersonal Switch Example 2. Magnum P80C100Mb Servers Workstations Locating Magnum P80F & P80C 10/00Mb Personal Switch Table-Top or Shelf MountingWall or vertical surface mounting Connecting Ethernet Media Media Ieee StandardConnecting Fiber Optic ST-type, twist-lock Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Power Budget Calculations for P80F Fiber Media Km, fdxPowering the Magnum P80F and P80C Dual-Speed Functionality, and Switching Switching, Filtering and ForwardingSwitching, Address Learning Auto-negotiation and Speed-sensing Full or Half Duplex, manual selection for P80F ModelsFull or Half Duplex, manual selection for P80C Models LED’s Up-link Port # 1 or 1SWUse with Media Converters Troubleshooting Before Calling for AssistanceReturn Material Authorization RMA Procedure When Calling for AssistanceNo Problem Found Shipping and Packaging Information