GarrettCom 6K32TRC user manual Rack-mounting, Reverse version of the Magnum 6K32T’s

Page 40

Magnum 6K32T & 6K32TRC Managed Switch

Installation and User Guide 05/07)

the Magnum 6K32T & 6K32TRC Switches. These brackets are popular in the Telco industry where they are a standard for Central Office rack-mounting purposes. The 23” and the ETSI brackets are mainly used for larger equipment

These brackets are rack-mounted in a frame typically accessed in operation from both sides.

The bracket mounting holes in the sides of the Magnum 6K32T & 6K32TRC permits it to be mounted in various ways. The same holes fit all three types (19”, ETSI, and 23”) of brackets. The mounting for the 23” is illustrated in Figure 3.3.1 below. The brackets may be attached flush with the front, or attached in the center for a set-back mounting which may reduce cabling torque.

The optional 23” brackets and the ETSI (21”) brackets each come as a pair in a package, along with the necessary screws for attaching the brackets to the sides of the Magnum Switch unit. They must be ordered as separate line items.

3.3.2 Rack-mounting, Reverse version of the Magnum 6K32T’s

(Not available as of October 2005) The optional Reverse Magnum 6K32T Model has all of the cabling (Ethernet cabling, power cabling and console port cabling) connectors in the rear, and the status LEDs in the front. The status LEDs that are co- incident with the ports are still present there, and a second or dual set of LEDs are used for status visibility in the front of the unit, showing the same data.

D

D C

C B

 

B A

 

Standard Flush

 

 

 

 

 

 

Mount Bracket

 

 

 

 

 

 

Mid-Range Mount

D

D C

C B

B A

 

A

or

 

 

 

 

Rear Mount

D

D C

C B

B A

A

Fig

3.3.2 Reverse Magnum 6K32TRC units, rack-mounted in a frame

www . GarrettCom . com

35

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Managed Switch 6K32TTrademarks Contacting GarrettCom, Inc Canadian EmissionSpecifications 6K32T & 6K32TRC Managed Switch Port Modules Magnum Line Technical Specifications PerformanceNetwork Standards and Compliance Maximum 10 Mbps Ethernet Segment LengthsFiber connector types supported Management Console connectorPower Supply Internal Maximum Standard Gigabit Ethernet Segment LengthsRelay Alarm Contact Optional Cooling MethodConfiguration Options Ordering InformationMagnum 6K32T & 6K32TRC Port Modules 6KP8-45MT 6KP8-45MLC 6KP8-45SLC 6KP6-MT10ST 6KP6-RJ10STGigabit Options Modules using Gbic Modules with Gb, not using GBICs6K32T/6K32TRC PoE Modules with 48VDC Pass-Through Www . GarrettCom . com Introduction Inspecting the Package and Product Product Description Magnum 6K32TRC Managed Switch Www . GarrettCom . com 1a Magnum 6K32T Managed Switch Chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Eight-Port Copper Module, 6K8-RJ45 MdixSpeed when OFF when auto Negotiation is not disabled @RJ-45 + 2@ 100Mb ST or SC Four-Port 10 Mb mm Fiber ST Modules Copper and 2@10Mb fiber mm ST Ports.@ RJ-45 + 2@ 10 Mb ST Operation of the SFF fiberGigabit 1000Mbps port modules Packet Prioritization, 802.1p QOS Frame Buffering and Flow ControlManaged Network Software MNS-6K for Magnum 6K32T & 6K32TRC MIBs for Snmp visit„ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Example 1 Magnum 6K32T Switch for a Vlan application ApplicationsData Example 3 Redundant Application 6K32TRC 6K32TRC in a Redundant application 6K32TRC with IGMP-L2 mode Installation Locating Magnum 6K32T SwitchesConnecting Ethernet Media Connecting Fiber Optic ST-type, twist-lockIeee Standard Media Type Max. Distance Port Module Fiber CopperConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Gigabit SFP Small Form-factor Pluggable Optical Transceivers Side View Duplex LC connector Front view Bail claspSFP-SX SFP-LX10 SFP-LX25 SFP-ZX40 SFP-ZX70 6KP4 ’cvrRack-mounting for 19 Retma racks, Magnum 6K32T & 6K32TRC’s Table-Top or Shelf Mounting1 Dual Side-Mountings for Magnum 6K32T & 6K32TRC units Rack-mounting, Reverse version of the Magnum 6K32T’s Powering the Magnum 6K32T & 6K32TRC Managed Switch 6K32T & 6K32TRC Port Module 6KPM Installation Preparation for Installing and Removing 6KPMsRemove Chassis Cover 1a Removing front panel after the screws being removed1b Pulling out the top coved from the chassis base Installing 6KPM Cards in the Magnum 6K32T & 6K32TRC 1d Top View 6KPM retaining screws hold Face PlateWww . GarrettCom . com Www . GarrettCom . com Removing 6KPM Cards Retaining screws shown by arrows . Remove 6KPM CardConsole DB-9 Port Rear View of Magnum 6K32TDB-9 Console port connector Pin Signal Description1 RS-232 DB-9 Console Com port Serial port pin assignments Filtering and Forwarding Switching FunctionalityAddress Learning Status LEDs Auto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 portsWww . GarrettCom . com Magnum 6K32T & 6K32TRC Managed Switch Port Modules Flow-control, Ieee 802.3x standard6KPM Module Description Lock Combo Module1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Transceivers all in one module. This Mode 100Mbps fiber opticActivity ACT, Link LK, Mode SC-type connectors. It Equipped with 4 dual speedCopper ports and 2 Single Provides an advantage Through combining copper5 6KP8-MTRJ, 8 @100Mb multi-mode FX , Mtrj Small-Form-factor Port@ 100Mbps Multi-Mode Fiber portWww . GarrettCom . com 7 6KP8-MLC, 8 ports @ 100Mbps multi-mode LC connector Small 9 6KP8-RJ45 Twisted Pair 10/100Mb 8-PortWww . GarrettCom . com PoE LEDs Summary 48VDC power in not No power is coming toInternally connected PoE ports for some Reason, all the PoE port LEDs are onGBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector Small size of LC connectorsGive an advantage of placing more Ports on one module. The 6KP8-4512a GBPM-2OTX Two Gigabit option 13 6KM-BLNK 12b GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC + 2@ 100Mb SC Before Calling for Assistance When Calling for Assistance Return Material Authorization RMA ProcedureNo Problem Found Shipping and Packaging InformationAppendix B Internal DC Power Supply Options Power Supply Internal -48VDC OptionB3.0 Applications for DC Powered Switches B4.1 UL Requirements for DC-powered units 6K32TRC -48VDCInstallation and User Guide 05/07 C3.0 DUAL-SOURCE OPTION, Theory of Operation C5.1 UL Requirements Example Magnum 6K32T & 6K32TRC-48VDC

6K32T, 6K32TRC specifications

The GarrettCom 6K32TRC and 6K32T are advanced, ruggedized network switches designed for mission-critical applications in challenging environments. These switches are notable for their reliability, versatility, and high performance, making them ideal for industries such as transportation, utilities, and industrial automation.

One of the key features of the 6K32TRC and 6K32T is their robust construction. These switches are built to withstand extreme temperatures, humidity, and harsh conditions, ensuring continued operation even in the most demanding settings. With an operational temperature range of -40°C to +75°C, they can function effectively in various climates, making them perfect for outdoor or unconditioned environments.

Both models are equipped with Layer 2 and Layer 3 switching capabilities, offering flexibility for different networking needs. The 6K32T, for instance, is designed specifically for applications that require high-speed connectivity and data management. With support for various Ethernet protocols, these switches provide reliable data transmission and low latency, essential for real-time applications.

The 6K32TRC model features enhanced redundancy and failover capabilities. It supports a range of network topologies including ring, star, and mesh configurations, ensuring that network uptime is maximized even in the face of component failures. Redundant power supply options further guarantee continuous operation.

Scalability is another highlight of the GarrettCom 6K32 series. The switches are modular, allowing users to easily add or replace various interface cards to support additional network connections or management features without significant downtime.

Security is paramount in industrial settings, and the 6K32TRC and 6K32T adhere to modern cybersecurity standards. They include features such as access control lists (ACLs), Secure Shell (SSH) for encrypted management access, and VLAN tagging to enhance network security.

In terms of management, the switches support an array of protocols for easy integration and monitoring within existing networks. SNMP, RMON, and web-based management interfaces streamline the administrative process, ensuring that network managers can efficiently oversee their operations.

Overall, the GarrettCom 6K32TRC and 6K32T switches exemplify reliability and advanced technology. Their robust design, comprehensive feature set, and focus on security make them an excellent choice for organizations requiring resilient network solutions in challenging industrial environments.
Top Page Image Contents