GarrettCom 6K32TRC user manual PoE LEDs Summary

Page 65

Magnum 6K32T & 6K32TRC Managed Switch

Installation and User Guide 05/07)

The LEDs on 6KP8-RJ45- PoE modules are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when connected properly to an 803.af compliant PD device on that port. When non-PoE devices are connected, the PoE LED is OFF. PoE does not affect operation of Ethernet data traffic.

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED that is marked as LINK/ACT, as shown in the diagram.

PoE LEDs Summary

•For PoE devices, each RJ-45 PoE port supports only 802.3af complaint devices. The PoE LED is ON when the attached PD is drawing power from the port.

•For non-PoE devices connected, the PoE port will act as a normal RJ-45 port and the PoE LED is OFF. No power is being sent out from the port.

•The PoE ports in Magnum 6K’s with 48VDC power input act as a pass- through, so the 48VDC power source must be strong enough to provide power to the 6K switch and to all the 8 RJ-45 ports with PD devices connected (up to 15 watts per PoE port).

•In the case where the 48VDC power in not internally connected and no power is coming to the PoE ports for some reason, all the PoE port LEDs are ON simultaneously to indicate a trouble condition. The ports will still operate properly for data traffic.

5.2.10b. New PoE(Power Inside), model PI6KP8-45RJ (MDIX), 10/100Mb 8-port

The PoE RJ-45 ports act similar to regular RJ-45 ports, except they have capability of providing power on each port to power up the PD devices, per the IEEE802.3af PoE standard. Only 4 x RJ-45 (10/100) ports maxm. support POE(Power

www . GarrettCom . com

60

Image 65

Contents 6K32T Managed SwitchTrademarks Canadian Emission Contacting GarrettCom, IncSpecifications 6K32T & 6K32TRC Managed Switch Port Modules Magnum Line Performance Technical SpecificationsNetwork Standards and Compliance Maximum 10 Mbps Ethernet Segment LengthsManagement Console connector Fiber connector types supportedPower Supply Internal Maximum Standard Gigabit Ethernet Segment LengthsCooling Method Relay Alarm Contact OptionalOrdering Information Configuration OptionsMagnum 6K32T & 6K32TRC Port Modules 6KP8-45MT 6KP8-45MLC 6KP8-45SLC 6KP6-MT10ST 6KP6-RJ10STModules with Gb, not using GBICs Gigabit Options Modules using Gbic6K32T/6K32TRC PoE Modules with 48VDC Pass-Through Www . GarrettCom . com Introduction Inspecting the Package and Product Product Description Magnum 6K32TRC Managed Switch Www . GarrettCom . com 1a Magnum 6K32T Managed Switch Chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Module, 6K8-RJ45 Mdix Eight-Port CopperSpeed when OFF when auto Negotiation is not disabled @RJ-45 + 2@ 100Mb ST or SC Copper and 2@10Mb fiber mm ST Ports. Four-Port 10 Mb mm Fiber ST Modules@ RJ-45 + 2@ 10 Mb ST Operation of the SFF fiberGigabit 1000Mbps port modules Frame Buffering and Flow Control Packet Prioritization, 802.1p QOSMIBs for Snmp visit Managed Network Software MNS-6K for Magnum 6K32T & 6K32TRC„ Features Fiber-Built-In Features and Benefits„ Managed switching for high performance Ethernet LANs Applications Example 1 Magnum 6K32T Switch for a Vlan applicationData Example 3 Redundant Application 6K32TRC 6K32TRC in a Redundant application 6K32TRC with IGMP-L2 mode Locating Magnum 6K32T Switches InstallationConnecting Fiber Optic ST-type, twist-lock Connecting Ethernet MediaIeee Standard Media Type Max. Distance Port Module Fiber CopperMedia Ieee Standard Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Gigabit SFP Small Form-factor Pluggable Optical Transceivers Bail clasp Side View Duplex LC connector Front viewSFP-SX SFP-LX10 SFP-LX25 SFP-ZX40 SFP-ZX70 ’cvr 6KP41 Dual Side-Mountings for Magnum 6K32T & 6K32TRC units Table-Top or Shelf MountingRack-mounting for 19 Retma racks, Magnum 6K32T & 6K32TRC’s Rack-mounting, Reverse version of the Magnum 6K32T’s Powering the Magnum 6K32T & 6K32TRC Managed Switch Preparation for Installing and Removing 6KPMs 6K32T & 6K32TRC Port Module 6KPM Installation1a Removing front panel after the screws being removed Remove Chassis Cover1b Pulling out the top coved from the chassis base 1d Top View 6KPM retaining screws hold Face Plate Installing 6KPM Cards in the Magnum 6K32T & 6K32TRCWww . GarrettCom . com Www . GarrettCom . com Retaining screws shown by arrows . Remove 6KPM Card Removing 6KPM CardsRear View of Magnum 6K32T Console DB-9 Port1 RS-232 DB-9 Console Com port Serial port pin assignments Pin Signal DescriptionDB-9 Console port connector Address Learning Switching FunctionalityFiltering and Forwarding Auto-Cross MDIXAuto-negotiation, for 10/100Mbps RJ-45 ports Status LEDsWww . GarrettCom . com Flow-control, Ieee 802.3x standard Magnum 6K32T & 6K32TRC Managed Switch Port Modules6KPM Module Description Module Lock Combo1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Activity ACT, Link LK, Mode 100Mbps fiber opticTransceivers all in one module. This Equipped with 4 dual speed Mode SC-type connectors. ItCopper ports and 2 Single Provides an advantage Through combining copperPort@ 100Mbps Multi-Mode Fiber port 5 6KP8-MTRJ, 8 @100Mb multi-mode FX , Mtrj Small-Form-factorWww . GarrettCom . com 7 6KP8-MLC, 8 ports @ 100Mbps multi-mode LC connector Small 10/100Mb 8-Port 9 6KP8-RJ45 Twisted PairWww . GarrettCom . com PoE LEDs Summary No power is coming to 48VDC power in notInternally connected PoE ports for some Reason, all the PoE port LEDs are onSmall size of LC connectors GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC ConnectorGive an advantage of placing more Ports on one module. The 6KP8-4512a GBPM-2OTX Two Gigabit option @ 1000Mb Fiber SC + 2@ 100Mb SC 12b GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector13 6KM-BLNK Before Calling for Assistance Return Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem FoundPower Supply Internal -48VDC Option Appendix B Internal DC Power Supply OptionsB3.0 Applications for DC Powered Switches 6K32TRC -48VDC B4.1 UL Requirements for DC-powered unitsInstallation and User Guide 05/07 C3.0 DUAL-SOURCE OPTION, Theory of Operation Example Magnum 6K32T & 6K32TRC-48VDC C5.1 UL Requirements

6K32T, 6K32TRC specifications

The GarrettCom 6K32TRC and 6K32T are advanced, ruggedized network switches designed for mission-critical applications in challenging environments. These switches are notable for their reliability, versatility, and high performance, making them ideal for industries such as transportation, utilities, and industrial automation.

One of the key features of the 6K32TRC and 6K32T is their robust construction. These switches are built to withstand extreme temperatures, humidity, and harsh conditions, ensuring continued operation even in the most demanding settings. With an operational temperature range of -40°C to +75°C, they can function effectively in various climates, making them perfect for outdoor or unconditioned environments.

Both models are equipped with Layer 2 and Layer 3 switching capabilities, offering flexibility for different networking needs. The 6K32T, for instance, is designed specifically for applications that require high-speed connectivity and data management. With support for various Ethernet protocols, these switches provide reliable data transmission and low latency, essential for real-time applications.

The 6K32TRC model features enhanced redundancy and failover capabilities. It supports a range of network topologies including ring, star, and mesh configurations, ensuring that network uptime is maximized even in the face of component failures. Redundant power supply options further guarantee continuous operation.

Scalability is another highlight of the GarrettCom 6K32 series. The switches are modular, allowing users to easily add or replace various interface cards to support additional network connections or management features without significant downtime.

Security is paramount in industrial settings, and the 6K32TRC and 6K32T adhere to modern cybersecurity standards. They include features such as access control lists (ACLs), Secure Shell (SSH) for encrypted management access, and VLAN tagging to enhance network security.

In terms of management, the switches support an array of protocols for easy integration and monitoring within existing networks. SNMP, RMON, and web-based management interfaces streamline the administrative process, ensuring that network managers can efficiently oversee their operations.

Overall, the GarrettCom 6K32TRC and 6K32T switches exemplify reliability and advanced technology. Their robust design, comprehensive feature set, and focus on security make them an excellent choice for organizations requiring resilient network solutions in challenging industrial environments.