GE GE-DS-242-POE user manual Parity None Data bits Stop bits Flow Control None

Page 3

Figure 1: Terminal setup diagram

A terminal program is required to make the software connection to the GE-DS- 242-PoE Managed Switch. Windows' Hyper Terminal program is a good choice. The Hyper Terminal program can be accessed from the Start menu.

1.Click START, then Programs/Accessories and then Hyper Terminal.

2.When the following screen appears, make sure that the COM port is configured as:

Baud

: 57600

Parity

: None

Data bits

: 8

Stop bits

: 1

Flow Control : None

Figure 2: COM1 properties window

P/N 1069668 • REV 1.0 • ISS 22FEB10

3 of 10

Image 3
Contents System Requirements Package ContentsRS-232 console Terminal SetupParity None Data bits Stop bits Flow Control None Logon to the Console Telnet SetupRJ-45 connection diagram Connect to dialog window Log on to the ConsoleStart Web Management Web Browser SetupIP management diagram Login to the managed SwitchLogin Screen Contact information Resetting the IP Address