GE GE-DS-242-POE user manual Log on to the Console, Connect to dialog window

Page 6

4.Change the Connect using drop-down menu to TCP/IP (Winsock) then input Host address. The Managed Switches default IP address is 192.168.0.100 and the default telnet port number is 23, then press the OK button.

Figure 6: The Connect to dialog window

Log on to the Console

Make sure the device finished booting. Once the telnet has connected to the device, the hyper terminal will display the login request.

Then, the following message asks the login user name and password. The factory default password as following and the login screen as following appear.

User name: admin

Password: admin

6 of 10

P/N 1069668 • REV 1.0 • ISS 22FEB10

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Package Contents System RequirementsTerminal Setup RS-232 console Parity None Data bits Stop bits Flow Control None Telnet Setup Logon to the ConsoleRJ-45 connection diagram Log on to the Console Connect to dialog windowWeb Browser Setup Start Web ManagementLogin to the managed Switch IP management diagramLogin Screen Resetting the IP Address Contact information
Top Page Image Contents