GE GE-DS-242-POE user manual Web Browser Setup, Start Web Management

Page 7

Figure 7: Login request window

Now you can configure the Switch by Telnet.

Web Browser Setup

Start Web Management

The following shows how to start up the Web Management of the GE-DS-242- PoE Managed Switch. Please note that the Managed Switch is configured through an Ethernet connection, make sure the manager PC must be set on the same IP subnet address.

For example, the default IP address of the GE-DS-242-PoE Managed Switch is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.

P/N 1069668 • REV 1.0 • ISS 22FEB10

7 of 10

Page 6 Page 8
Image 7
Page 6 Page 8
Contents System Requirements Package ContentsRS-232 console Terminal SetupParity None Data bits Stop bits Flow Control None Logon to the Console Telnet SetupRJ-45 connection diagram Connect to dialog window Log on to the ConsoleStart Web Management Web Browser SetupIP management diagram Login to the managed SwitchLogin Screen Contact information Resetting the IP Address
Top Page Image Contents