GE GE-DS-242-POE user manual Telnet Setup, Logon to the Console

Page 4

Logon to the Console

Once the terminal has connected to the device, power on the GE-DS-242-PoE Managed Switch, the terminal will display that it is running testing procedures.

Then, the following message asks for the login user name and password. The factory default password for the login screen is:

Username: admin

Password: admin

Figure 3: GE-DS-242-PoE Login screen

Note: For security reasons, please change and memorize the new password after this first setup. Passwords must be entered in lowercase letters in the console interface.

Telnet Setup

1.Connect an RJ-45 cable from the PC to a Switch port on the Managed Switch.

4 of 10

P/N 1069668 • REV 1.0 • ISS 22FEB10

Image 4
Contents Package Contents System RequirementsTerminal Setup RS-232 consoleParity None Data bits Stop bits Flow Control None Telnet Setup Logon to the ConsoleRJ-45 connection diagram Log on to the Console Connect to dialog windowWeb Browser Setup Start Web ManagementLogin to the managed Switch IP management diagramLogin Screen Resetting the IP Address Contact information