GE ZBD7005, ZBD6400, ZBD6900, ZBD6600, ZBD6500, ZBD6700, ZBD7100, ZBD7000 Installation Instructions

Page 10

Installation Instructions

BEFORE YOU BEGIN:

CUSTOM PANEL INSTALLATION: If you intend to install custom door panels, (on some models) refer to trim kit installation instructions. Custom panels should be in place before installing the dishwasher.

STEP 1 REMOVE PACKAGING

Cut the shipping carton and use it as a pad beneath the dishwasher. This will protect the finished floor in the kitchen.

Remove wrapping and uncoil the drain hose in the back of the dishwasher. Do not remove rear insulation blanket.

Lay the dishwasher on it’s back. Do not kink or crush the drain hose.

STEP 2 INSTALL LEVELING LEGS

1-1/4" Min.

Remove

Red Plugs

 

Unscrew

Rear

Rear Legs to

Installation

Insulation

Height

Blanket

 

Measure installation opening from the floor to the bottom of the countertop.

Install the front leveling legs into holes on the brack- ets. Use a wrench to screw the legs in until the overall height of the dishwasher is 1/4" less than the installa- tion opening height.

Note: Install the legs as shown, 1-1/4" min from the bottom of the bracket.

Remove and discard the red plugs from the front holes.

STEP 3 REMOVE ACCESS COVER

Insulation Board

Junction Box

Access Cover

Remove sound insulation board and the access cover plate.

Install UL listed strain relief on junction box.

STEP 4 INSTALL 90° ELBOW

90°

Elbow

Thread Seal Tape

Install the 90° elbow onto the water inlet. Use thread seal tape or pipe thread compound. Thread seal tape should be wrapped in same direction as the threads on the elbow.

The 90° elbow should face the inlet water line.

10

Image 10
Contents Installation Instructions Contents Safety InformationRead Carefully Keep These Instructions Dishwasher Models Product DimensionsDesign Information CHEF’S Washer ModelsMaterials YOU will Need Installation PreparationTools YOU will Need Parts Supplied Prepare Dishwasher EnclosureDetermine Drain Method Drain RequirementsCabinet Preparation Electrical Requirements Prepare Electrical WiringGrounding Instructions-Power Cord Grounding Instructions-Cable DirectPrepare HOT Water Line Water Line ConnectionPanel with ZPF625 Trim KIT Custom Panel DimensionsCustom Panel for Models ZBD6400 only Panel with ZPF675 Trim KITInstallation Instructions Level Dishwasher Install Power CordConnect Water Line Connect Drain Line Verify that power is turned off at the sourceConnect Electrical PRE-TEST Check List Position and Level the DishwasherDishwasher WET Test Install Toekick Adjust Side Trim StripsDraw Centerline Install Custom HandleInstall Panel Align Template To PanelMonogram
Related manuals
Manual 32 pages 31.98 Kb Manual 32 pages 48.47 Kb

ZBD7005, ZBD6605, ZBD7105, ZBD6905, ZBD7000 specifications

General Electric (GE) has long been a leader in home appliances, and its line of dishwashers exemplifies this tradition of innovation and quality. The GE ZBD6400, ZBD6900, ZBD6600, ZBD6500, and ZBD6700 models represent a spectrum of advanced features designed to elevate the dishwashing experience.

The GE ZBD6400 is known for its efficient performance and spacious interior. With a capacity to hold up to 14 place settings, this model is perfect for families and gatherings. It boasts a Piranha hard food disposer, which pulverizes food scraps to prevent clogging and ensure a clean wash. Furthermore, the ZBD6400 includes various wash cycles, including a High-Temperature Wash option, to tackle even the toughest stains.

Moving to the ZBD6900, this model incorporates cutting-edge SmartDry technology, which enhances drying effectiveness by using special sensors to adjust drying time based on load size and soil level. Its ultra-quiet operation ensures that it runs silently, making it suitable for open-concept kitchens. The model also features a stainless steel interior, enhancing durability and providing better heat retention during washing cycles.

The GE ZBD6600 combines convenience and efficiency with its Advanced wash system. This system includes multiple spray arms and a rotating arm to ensure thorough cleaning. The model’s one-piece door and sleek design add a modern touch to any kitchen decor. Additionally, the ZBD6600 is designed with energy efficiency in mind, drawing less water and energy while maintaining superior cleaning performance.

In the ZBD6500, GE enhances usability with its built-in soil sensor technology that detects food particles and adjusts wash cycles accordingly. This model features a large capacity and intuitive controls, allowing users to customize their washing experience seamlessly. The ZBD6500 also includes a delay start option, providing flexibility for busy households.

Lastly, the ZBD6700 is equipped with the innovative bottle wash feature, enabling it to clean tall items like sports bottles and baby bottles effortlessly. Its sleek design and high-performance filtering system not only enhance cleanliness but also contribute to the durability of the appliance.

Each of these GE dishwasher models exemplifies reliability and effective performance, tailored to meet the diverse needs of modern households. With their advanced features, technologies, and thoughtful design, GE continues to be a trusted name in dishwashing solutions.