GE ZBD6500, ZBD6400, ZBD6900, ZBD6600, ZBD6700, ZBD7100 Install Toekick, Adjust Side Trim Strips

Page 14

Installation Instructions

STEP 14 SECURE DISHWASHER TO CABINET AND COUNTERTOP

To maintain position and alignment, the dishwasher must be secured to the countertop and adjacent cabinets.

Secure dishwasher to countertop:

Drill pilot holes through the mounting bracket and into the underside of the countertop. Secure with screws A provided.

Screw A

IMPORTANT: To avoid damage to your dishwasher, drive screws straight and flush. Protruding screw heads may scratch the top of the escutcheon or door and can interfere with door closing.

Secure dishwasher to adjacent cabinets:

Remove plastic plugs button on the inside of the dishwasher frame. One on each side.

Drill pilot holes through the dishwasher holes and into the adjacent cabinets. Install screws B provided.

Replace plastic plug buttons.

STEP 15 INSTALL TOEKICK

Loosen depth adjustment screws inside the

bracket.

Adjust to

• Slide bracket out

Toekick

Depth

to proper depth.

 

Tighten screws.

 

Attach supplied toekick to brackets with

screws C provided. Do not tighten.

• Adjust the toekick

 

to touch the floor.

Attachment Screws

Tighten screws.

Adjust to Touch Floor

INSTALL A

CONTINUOUS

CUSTOM

TOEKICK

Notch the continuous toekick to allow the door panel to swing under the dishwasher.

A continuous custom toekick is recommended for models with long custom door panels.

Cut a notch in the toekick deep enough to allow the door to swing freely under the dishwasher.

Check for interference by slowly opening and closing the door. If the door touches the toekick, trim to prevent interference.

Secure the toekick to adjacent cabinets in such a manner that it may be removed if service is required.

STEP 16 ADJUST SIDE TRIM STRIPS

Plug Buttons

Screw B

Open the door fully.

Loosen (but do not remove) screws holding the top and side trims.

Adjust trim to cover opening gap. Tighten screws.

Adjust Side Trim to Meet Cabinetry

Loosen

Screws

14

Image 14
Contents Installation Instructions Read Carefully Keep These Instructions Safety InformationContents Dishwasher Models Product DimensionsDesign Information CHEF’S Washer ModelsTools YOU will Need Installation PreparationMaterials YOU will Need Parts Supplied Prepare Dishwasher EnclosureCabinet Preparation Drain RequirementsDetermine Drain Method Electrical Requirements Prepare Electrical WiringGrounding Instructions-Power Cord Grounding Instructions-Cable DirectPrepare HOT Water Line Water Line ConnectionPanel with ZPF625 Trim KIT Custom Panel DimensionsCustom Panel for Models ZBD6400 only Panel with ZPF675 Trim KITInstallation Instructions Connect Water Line Install Power CordLevel Dishwasher Connect Electrical Verify that power is turned off at the sourceConnect Drain Line Dishwasher WET Test Position and Level the DishwasherPRE-TEST Check List Install Toekick Adjust Side Trim StripsDraw Centerline Install Custom HandleInstall Panel Align Template To PanelMonogram
Related manuals
Manual 32 pages 31.98 Kb Manual 32 pages 48.47 Kb

ZBD7005, ZBD6605, ZBD7105, ZBD6905, ZBD7000 specifications

General Electric (GE) has long been a leader in home appliances, and its line of dishwashers exemplifies this tradition of innovation and quality. The GE ZBD6400, ZBD6900, ZBD6600, ZBD6500, and ZBD6700 models represent a spectrum of advanced features designed to elevate the dishwashing experience.

The GE ZBD6400 is known for its efficient performance and spacious interior. With a capacity to hold up to 14 place settings, this model is perfect for families and gatherings. It boasts a Piranha hard food disposer, which pulverizes food scraps to prevent clogging and ensure a clean wash. Furthermore, the ZBD6400 includes various wash cycles, including a High-Temperature Wash option, to tackle even the toughest stains.

Moving to the ZBD6900, this model incorporates cutting-edge SmartDry technology, which enhances drying effectiveness by using special sensors to adjust drying time based on load size and soil level. Its ultra-quiet operation ensures that it runs silently, making it suitable for open-concept kitchens. The model also features a stainless steel interior, enhancing durability and providing better heat retention during washing cycles.

The GE ZBD6600 combines convenience and efficiency with its Advanced wash system. This system includes multiple spray arms and a rotating arm to ensure thorough cleaning. The model’s one-piece door and sleek design add a modern touch to any kitchen decor. Additionally, the ZBD6600 is designed with energy efficiency in mind, drawing less water and energy while maintaining superior cleaning performance.

In the ZBD6500, GE enhances usability with its built-in soil sensor technology that detects food particles and adjusts wash cycles accordingly. This model features a large capacity and intuitive controls, allowing users to customize their washing experience seamlessly. The ZBD6500 also includes a delay start option, providing flexibility for busy households.

Lastly, the ZBD6700 is equipped with the innovative bottle wash feature, enabling it to clean tall items like sports bottles and baby bottles effortlessly. Its sleek design and high-performance filtering system not only enhance cleanliness but also contribute to the durability of the appliance.

Each of these GE dishwasher models exemplifies reliability and effective performance, tailored to meet the diverse needs of modern households. With their advanced features, technologies, and thoughtful design, GE continues to be a trusted name in dishwashing solutions.