GE ZBD6400, ZBD6900, ZBD6600, ZBD6500 Install Power Cord, Level Dishwasher, Connect Water Line

Page 11

Installation Instructions

STEP 5 INSTALL POWER CORD

SKIP THIS STEP IF DISHWASHER

WILL BE DIRECT WIRED

Maximum power cord length is 6 ft.

The power cord and connections must comply with the National Electrical Code, Section 422 and/or local codes and ordinances.

Insert power cord wires through strain relief and tighten.

Ground

White

Black

Strip 1/2" insulation from ends of power cord wires.

Connect incoming power cord white to dishwasher white, black to black and ground to dishwasher green wire. Use UL listed wire connectors of appropriate size.

Install junction box cover with screws provided. Be sure wires are not pinched under the cover.

STEP 7 SLIDE DISHWASHER INTO OPENING

DO NOT PUSH AGAINST THE FRONT PANEL WITH KNEES, DAMAGE WILL OCCUR!

Insert drain hose into the cabinet wall hole. If a power cord is used, guide the end through a separate hole.

Position water supply line and house wiring on the floor of the opening to avoid interference with base of dishwasher.

Slide dishwasher into the opening a few inches at a time. As you proceed, pull the drain hose through the cabinet wall under the sink.

Check to be sure there is no interference with waterline or house wiring.

Again, check to be sure the dishwasher is level.

STEP 6 LEVEL DISHWASHER

Carefully, upright the dishwasher, be careful not to bend the leveling legs.

Check to be sure the dishwasher is level and is adjusted to fit the installation cutout height.

Level

Top and Sides

STEP 8 CONNECT WATER LINE

NOTE: If you are using an existing water line, cut 1" off the end. Always use a new ferrule and compression nut.

The water supply line should be flushed to clear any foreign material before connecting to the dishwasher.

Make sure there are no sharp bends or kinks to restrict water flow.

Insert water line into the 90° elbow.

Slide ferrule against

elbow and secure with

Compression Nut

Ferrule

compression nut.

• Replace access panel

 

plate.

Hot Water

 

 

90° Elbow Supply Line

11

Image 11
Contents Installation Instructions Read Carefully Keep These Instructions Safety InformationContents CHEF’S Washer Models Product DimensionsDesign Information Dishwasher ModelsTools YOU will Need Installation PreparationMaterials YOU will Need Prepare Dishwasher Enclosure Parts SuppliedCabinet Preparation Drain RequirementsDetermine Drain Method Grounding Instructions-Cable Direct Prepare Electrical WiringGrounding Instructions-Power Cord Electrical RequirementsWater Line Connection Prepare HOT Water LinePanel with ZPF675 Trim KIT Custom Panel DimensionsCustom Panel for Models ZBD6400 only Panel with ZPF625 Trim KITInstallation Instructions Connect Water Line Install Power CordLevel Dishwasher Connect Electrical Verify that power is turned off at the sourceConnect Drain Line Dishwasher WET Test Position and Level the DishwasherPRE-TEST Check List Adjust Side Trim Strips Install ToekickAlign Template To Panel Install Custom HandleInstall Panel Draw CenterlineMonogram
Related manuals
Manual 32 pages 31.98 Kb Manual 32 pages 48.47 Kb

ZBD7005, ZBD6605, ZBD7105, ZBD6905, ZBD7000 specifications

General Electric (GE) has long been a leader in home appliances, and its line of dishwashers exemplifies this tradition of innovation and quality. The GE ZBD6400, ZBD6900, ZBD6600, ZBD6500, and ZBD6700 models represent a spectrum of advanced features designed to elevate the dishwashing experience.

The GE ZBD6400 is known for its efficient performance and spacious interior. With a capacity to hold up to 14 place settings, this model is perfect for families and gatherings. It boasts a Piranha hard food disposer, which pulverizes food scraps to prevent clogging and ensure a clean wash. Furthermore, the ZBD6400 includes various wash cycles, including a High-Temperature Wash option, to tackle even the toughest stains.

Moving to the ZBD6900, this model incorporates cutting-edge SmartDry technology, which enhances drying effectiveness by using special sensors to adjust drying time based on load size and soil level. Its ultra-quiet operation ensures that it runs silently, making it suitable for open-concept kitchens. The model also features a stainless steel interior, enhancing durability and providing better heat retention during washing cycles.

The GE ZBD6600 combines convenience and efficiency with its Advanced wash system. This system includes multiple spray arms and a rotating arm to ensure thorough cleaning. The model’s one-piece door and sleek design add a modern touch to any kitchen decor. Additionally, the ZBD6600 is designed with energy efficiency in mind, drawing less water and energy while maintaining superior cleaning performance.

In the ZBD6500, GE enhances usability with its built-in soil sensor technology that detects food particles and adjusts wash cycles accordingly. This model features a large capacity and intuitive controls, allowing users to customize their washing experience seamlessly. The ZBD6500 also includes a delay start option, providing flexibility for busy households.

Lastly, the ZBD6700 is equipped with the innovative bottle wash feature, enabling it to clean tall items like sports bottles and baby bottles effortlessly. Its sleek design and high-performance filtering system not only enhance cleanliness but also contribute to the durability of the appliance.

Each of these GE dishwasher models exemplifies reliability and effective performance, tailored to meet the diverse needs of modern households. With their advanced features, technologies, and thoughtful design, GE continues to be a trusted name in dishwashing solutions.