GE ZBD7100, ZBD6400, ZBD6900, ZBD6600, ZBD6500, ZBD6700 Parts Supplied, Prepare Dishwasher Enclosure

Page 5
20-1/2"
Countertop
Dishwasher

Installation Preparation

PARTS SUPPLIED:

Remove the hardware accessory bag and other parts from inside or taped to the outside of the dishwasher. Check contents against illustrations to insure that all parts are included.

2-piece toekick

 

 

♦ 6 screws (see illustration)

 

 

♦ 2 leveling legs

Junction

 

♦ Template for the installation of a

Box Cover

 

with screws

2 Leveling Legs

custom panel packed with models

 

 

ZBD7000 and ZBD7005 only

 

 

♦ Junction box cover

 

 

Template

for

ZBD7000

ZBD7005

Only

Template with Mounting Hardware

Screws A

Screws B

Screws C

 

(2) Countertop

(2) Cabinet

(2) Color

 

Mounting

Mounting

Matched

2-Piece Toekick with

Screws

Screws

Toekick

Sound Insulation

 

 

Screws

 

 

 

PREPARE DISHWASHER ENCLOSURE

 

This Wall Area

 

 

must be Free of

 

34" to 35"

Pipes or Wires

24"

1-3/4"

Underside

Min.

of Countertop

 

 

to Floor

 

 

 

 

6"

 

23-7/8" Min.

 

 

24-1/4" Max

 

*Models ZBD7000 and ZBD7005 with custom panels are 24-3/4" deep

The floor inside the opening must be even and level with the finished floor of the kitchen. If the kitchen floor is tile, it may be

higher than the floor of the installation cutout. Pieces of wood may be placed into the cutout floor to make it level or higher than the room

floor. This will allow easy removal for any future service.

The rough cabinet opening must be at least 24” deep, 23-7/8”min. to 24-1/4” wide. The height should be 34” min. and 35” max.

Note: ADA installation, beneath 34" high countertops may be accom- plished by removing front leveling legs. Drain hose, water and electrical must be routed through the cutout on the back of the dishwasher.

The dishwasher must be installed so that drain hose is no more than 10 feet in length for proper drainage.

The dishwasher must be fully enclosed on the top, sides and back, but should not support any part of the enclosure.

Corner Installation

When installing into a corner, allow 2" min. clearance between dishwasher and adjacent cabinet or wall.

Allow 24-1/8" min. clearance from the front of the dishwasher for door opening.

24-1/8"

Clearance for Door Opening 2" Minimum

5

Image 5
Contents Installation Instructions Read Carefully Keep These Instructions Safety InformationContents Design Information Product DimensionsDishwasher Models CHEF’S Washer ModelsTools YOU will Need Installation PreparationMaterials YOU will Need Prepare Dishwasher Enclosure Parts SuppliedCabinet Preparation Drain RequirementsDetermine Drain Method Grounding Instructions-Power Cord Prepare Electrical WiringElectrical Requirements Grounding Instructions-Cable DirectWater Line Connection Prepare HOT Water LineCustom Panel for Models ZBD6400 only Custom Panel DimensionsPanel with ZPF625 Trim KIT Panel with ZPF675 Trim KITInstallation Instructions Connect Water Line Install Power CordLevel Dishwasher Connect Electrical Verify that power is turned off at the sourceConnect Drain Line Dishwasher WET Test Position and Level the DishwasherPRE-TEST Check List Adjust Side Trim Strips Install ToekickInstall Panel Install Custom HandleDraw Centerline Align Template To PanelMonogram
Related manuals
Manual 32 pages 31.98 Kb Manual 32 pages 48.47 Kb

ZBD7005, ZBD6605, ZBD7105, ZBD6905, ZBD7000 specifications

General Electric (GE) has long been a leader in home appliances, and its line of dishwashers exemplifies this tradition of innovation and quality. The GE ZBD6400, ZBD6900, ZBD6600, ZBD6500, and ZBD6700 models represent a spectrum of advanced features designed to elevate the dishwashing experience.

The GE ZBD6400 is known for its efficient performance and spacious interior. With a capacity to hold up to 14 place settings, this model is perfect for families and gatherings. It boasts a Piranha hard food disposer, which pulverizes food scraps to prevent clogging and ensure a clean wash. Furthermore, the ZBD6400 includes various wash cycles, including a High-Temperature Wash option, to tackle even the toughest stains.

Moving to the ZBD6900, this model incorporates cutting-edge SmartDry technology, which enhances drying effectiveness by using special sensors to adjust drying time based on load size and soil level. Its ultra-quiet operation ensures that it runs silently, making it suitable for open-concept kitchens. The model also features a stainless steel interior, enhancing durability and providing better heat retention during washing cycles.

The GE ZBD6600 combines convenience and efficiency with its Advanced wash system. This system includes multiple spray arms and a rotating arm to ensure thorough cleaning. The model’s one-piece door and sleek design add a modern touch to any kitchen decor. Additionally, the ZBD6600 is designed with energy efficiency in mind, drawing less water and energy while maintaining superior cleaning performance.

In the ZBD6500, GE enhances usability with its built-in soil sensor technology that detects food particles and adjusts wash cycles accordingly. This model features a large capacity and intuitive controls, allowing users to customize their washing experience seamlessly. The ZBD6500 also includes a delay start option, providing flexibility for busy households.

Lastly, the ZBD6700 is equipped with the innovative bottle wash feature, enabling it to clean tall items like sports bottles and baby bottles effortlessly. Its sleek design and high-performance filtering system not only enhance cleanliness but also contribute to the durability of the appliance.

Each of these GE dishwasher models exemplifies reliability and effective performance, tailored to meet the diverse needs of modern households. With their advanced features, technologies, and thoughtful design, GE continues to be a trusted name in dishwashing solutions.