GE MDS 05-4558A01 manual Link LED

Page 15

Table 1. Troubleshooting Using LEDs (Continued)

Symptom

Problem/Recommended Checks

 

 

LINK LED

a. Network Names of APs and Remotes do not match.

not lit.

They must be identical for association to occur—Also,

 

verify that the system has a unique Network Name.

 

b. Remote not yet associated with an Access Point with

 

the same Network Name.

 

Check the “Status” of the unit’s process of associating

 

with the Access Point. Use the Menu System.

 

c. Poor Antenna System—Check the antenna, feedline

 

and connectors. Reflected power should be less than

 

10% of the forward power reading (SWR 2:1 or lower).

 

d. Wrong Frequency Mode parameters where units need

 

to be time synchronized. Frequency Mode parameters

 

are channel, bandwidth and pattern offset.

 

e. Wrong encryption settings—The Encryption Enable

 

and Encryption Phrase must match on the AP and

 

Remote.

 

f. Wrong device authentication settings—Verify settings

 

match on AP and Remote.

 

 

LAN LED not

a. Verify the Ethernet cable is connected at both ends.

lit.

b. Verify that the appropriate type of Ethernet cable is

 

 

used: straight-through, or crossover as required.

 

c. Verify setting of parameter Eth Port Follows

 

Association if selected or enabled. If enabled, LED

 

does not light when Remote is not associated.

 

 

GPS LED

Indicates no GPS fix has been obtained. This only applies

not lit

when GPS operation is desired.

 

a. Check connection of GPS antenna cable and the

 

antenna itself. Is there a clear “view” to satellites?

 

Note: Blinking LED indicates establishing TDD Sync.

 

 

12

MDS Mercury Series Startup Guide

05-4558A01, Rev. C

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MDS Mercury Series Contents Installation Overview Installation StepsProduct Description Mount the Transceiver Install the AntennaReview the Transceiver’s Configuration Measure & Connect Primary PowerConfiguration MenuFrequency Control. The following modes Repeat above steps for each unit in the network Check for Normal Operation Connect the Data EquipmentAiming Directional Antennas Resetting to Factory Defaults Use with CautionMain Menu Menu SystemMGT System Menu Default VALUES/RANGE Installation Reference ChartProcedure Transmitter Power & Antenna Test Troubleshooting Using LEDs TroubleshootingLink LED Troubleshooting with the Menu System Receiver SpecificationsGeneral TransmitterManagement Physical InterfaceApprovals ProtocolsTechnical Assistance GE MDS, LLC

MDS 05-4558A01 specifications

The GE MDS 05-4558A01 is a robust and versatile communication device designed primarily for industrial applications. This product is part of a larger line of GE MDS communication solutions that ensure reliable data transmission over various distances, making it a preferred choice for manufacturers and operators in sectors such as utilities, transportation, and various industrial settings.

One of the main features of the GE MDS 05-4558A01 is its ability to support multiple communication protocols. This adaptability allows integration into a variety of existing network setups, facilitating seamless connectivity and efficient data transfer. The device is equipped with advanced packet radio technology, which enhances its performance in noisy environments, a common challenge in industrial operations.

The GE MDS 05-4558A01 also boasts a high level of scalability. Users can easily expand their networks as their operational needs grow, ensuring that the communication infrastructure remains robust and future-proof. This scalability is crucial for industries that require both immediate and long-term data transmission solutions without significant reinvestment in new technologies.

In addition to its communication capabilities, the device features durable construction designed to withstand harsh environmental conditions. Its rugged design ensures reliability in extreme temperatures, humidity, and even exposure to dust and chemicals. This durability is coupled with a compact form factor, allowing for flexible installation in various locations and environments.

Another significant characteristic of the GE MDS 05-4558A01 is its low power consumption. Designed to operate efficiently, it minimizes energy usage while maintaining consistent performance. This feature is particularly important for remote installations where power resources may be limited.

The device also incorporates advanced security protocols to protect the integrity of transmitted data. By employing encryption techniques and secure authentication methods, the GE MDS 05-4558A01 ensures that sensitive information remains protected from unauthorized access.

Its user-friendly interface simplifies installation and management, enabling technicians to quickly configure and deploy the devices with minimal training. This ease of use is complemented by comprehensive technical support provided by GE, ensuring that users can maximize the performance of their communication infrastructure.

Overall, the GE MDS 05-4558A01 stands out for its integration of advanced technologies, robust features, and reliability, making it an exceptional choice for industries needing dependable and secure data communication solutions.
Top Page Image Contents